Roland Before using the KR-11, Setting up the music stand, Connecting the Pedal Cable

3. Before using the KR-11

KR-11 – Setting up the music stand

3.1 Connections

Connecting the Pedal Cable

Insert the pedal cable into the Pedal connector on the panel of the KR-11.

Connecting the power cord

To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any con- nections.

1.Connect the supplied power cable to the AC Inlet on the KR-11’s panel.

2.Connect the power cable to an AC outlet.

Be sure to use the supplied power cord.

3.2 Setting up the music stand

Set up the music stand as shown in the figure below.

Fold the three supporting feet at the back of the stand and check whether the stand is held in place.

Before moving the KR-11, be sure to lower the music stand as a safety precaution.

3.3Opening and closing the keyboard lid

1.When opening the KR-11’s lid, grasp it with both hands and gently lift it upwards, then slide it towards the back of the piano.

2.When closing the lid, slowly pull it forward, then gently lower it into place.

Never insert your hands between the lid and the key- board.

9