USB Interface Overview, Information, Repeat

Basic Operation

USB port and operation

You can play your own video and audio files(supports MP3,WMA, MPG, JPEG and VCD formats) stored in external USB memory devices(e.g., flash drive, card reader, external hard drive) by connecting any one of such devices to USB port. Notice: these devices have to be FAT32 formatted to be able to play content.

1.Inset the USB device into the USB interface

2.Press the USB/CARD button to make the USB menu appear on the screen.

3.Use arrow keys to select file and press ENTER to play.

4.Press the USB/CARD button to switch back to DVD playback.

*If no disc is being played, the device mode will automatically switch to USB device and play the first

USB INTERFACE OVERVIEW:

1.FILE PATH-Display current file path/address and file name.

2.THE ROOT DIRECTOR-Display the directories (folders) .

3.FILE NAME-Display the names of files under the root directory.

4.FILE TYPE-Choose the type of files you want to view.

Insert card as below

MINI SD

2		SD

MINISD

SD, MMC and mini SD slots

You can play video and audio files(supporting MP3, WMA, MPG, JPEG and VCD formats) stored in SD and MMC card by connecting any one of such devices into the memory card slots. If no disc is being played, the unit mode will automatically switch to memory card mode to play audio and video files.

Note:

These devices have to be formatted in FAT32 in order for it to be able to play the content inside the memory card.

If you need to switch to memory card mode:

1.Insert the memory card into the memory card slot.

2.Press the USB/CARD button to make the memory card menu appear on the screen.

3.The first song on your memory card should play

automatically. You can stop this playback and choose another song to be play.

*NOTE: Machine will switch to the USB mode first then the card memory mode if both devices are connected at the same time.

INFORMATION:

Pressing OSD button can display playback time and disc information on the screen. Press DISPLAY button again to turn it off.

	TOTAL TRACK
TYPE OF DISC CURRENT		MUTE	REPEAT	TIME
				TIME

REPEAT

Press REPEAT button and the track will be played repetitively. There are two methods including single repeating and all play repeating.

By pressing A-B button can set time repeating. The first press will set the start point and the second press will set the end point. (Remark: the start point and the end point must be in the same track.* CDG can not use time repeating).

CANCEL REPEAT	REPEAT ONE	REPEAT ALL
CANCEL REPEAT

NUMBER BUTTONS:

Used for fast selection of tracks. Just press the track number that you want to play.

DIRECTION BUTTONS:

Use direction buttons to move the cursor up, down, left and right. Press direction buttons to move the image when use zoom function.

ZOOM IN/OUT:

Press ZOOM button to enter the zoom in / out menu, and the screen will display “ZOOM (1/4 to 4 times)”. Press OK to exit. Press direction button to move the image When use zoom function.*DVD mode only