Input Level, Music Effect INPUT/OUTPUT Jacks

DESCRIPTIONS AND FUNCTIONS

INPUT LEVEL

Turn this input level control to adjust the input level. Turn the input level control counter- clockwise to reduce the input level. Turn the input level control clockwise to raise the input level.

MUSIC EFFECT INPUT/OUTPUT JACKS

The EFFECT allows the AKJ7404 user to add any sound effecter, such as an equalizer, as a part of the music loop in the AKJ7404 unit. If a sound effecter is not used, check to make sure that two U-shaped connectors are connected from the IN jacks to the OUT jacks. The first U-shaped connector is to be connected from the white IN jack to the white OUT jack. The second U-shaped connector is to be connected from the red IN jack to the red OUT jack. If a sound effecter is to be placed in between the IN jacks and the OUT jacks, the U-shaped connectors need to be removed from the unit and make sure that these U-shaped connectors are taped to the bottom of this unit for future use. The IN jacks are to be connected to the input ports of the sound effecter and the output ports of the sound effecter are to be connected to the OUT jacks.

PRE- OUT

The pre-amplifier audio output (PRE- OUT) can be connected to an external power amplifier if needed.

FUSE

Please turn off the AC power and unplug the AC cord before replacing the fuse (ONLY replacing with the same type and rating of fuse).

AC POWER CORD

Plug this cord into an AC wall outlet.

REMOTE IN

This jack is used to connect to an external remote control sensor. When an external remote control sensor is used, the remote sensor on the front panel is deactivated.

AUTO ON OFF SWITCH

When this AUTO ON OFF switch is set to ON, the audio/video input source will be automatically switched to any audio/video input source with signals. The priority of determining which audio/ video input source with signals to be selected is as follows: video > audio and DVD>VCD>AUX>BGM.

When the AUTO ON OFF switch is set to OFF, the audio/video input source needs to be selected manually by pressing any of the input selection buttons. The initial input source selection after

the power is turned on is the DVD input.

VIDEO OUTPUT JACKS (1, 2, 3, 4)

These video output jacks are to be connected to TV monitors.

MICROPHONE INPUT JACKS (MIC A AND MIC B) These microphone input jacks are to be connected to microphones. The MIC A jack is common to the MIC 2 jack on the front panel. The MIC B jack is common to the MIC 3 jack on the front panel.

MIC EFFECT INPUT/OUTPUT JACKS

The MIC EFFECT allows the AKJ7404 user to add any sound effecter, such as an equalizer, as a part of the microphone loop in the AKJ7404 unit. If a sound effecter is not used, check to make sure that the U-shaped connector is connected from the IN jack to the OUT jack. If a sound effecter is to be placed in between the IN jack and the OUT jack, the U-shaped connector needs to be removed from the unit and make sure that the U-shaped connector is taped to the bottom of this unit for future use.

The IN jack is to be connected to the input port of the sound effecter and the output port of the sound effecter is to be connected to the OUT jack.

VOLTAGE SELECTOR

Check to make sure the AC Voltage Selector switch is set to the proper voltage for your area (120V/60Hz for the North America Area) before plugging in the AC cord to the AC power outlet.

CAUTION: UNPLUG THE AC CORD FROM THE AC POWER OUTLET BEFORE RESETTING THE AC VOLTAGE SELECTOR SWITCH.

VIDEO INPUT JACKS (DVD, VCD, AUX, BGM) These video input jacks are to be connected to a DVD player, a VCD player, or other video units.