Headphones connections What you will need

General Connections

Headphones connections

What you will need

●Headphones with a ¼ inch connector at the other end of the cable (not included).

1.Connect the connector of the headphones to the ¼ inch HEADPHONES output on the front panel of the AKJ7809.

VCD

L R

Microphone/instrument input connections

After completing your main system connections, it is time to get your microphones and instruments connected and ready for performing. Before you get started with your connections we recommend that you take the following tips into consideration:

●When connecting instruments, refrain from using low quality or worn cables as they can cause significant noise and loud pops, posing a threat to the system's speakers.

●Use caution when connecting a chain of multiple effects pedals, as the output voltage may change and possibly overload the AKJ7809 input channel.

The AKJ7809 has one guitar (¼ inch), one keyboard (¼ inch) and two microphone (¼ inch/XLR) inputs.

1.To connect MICROPHONES via ¼ inch mic cables, connect the XLR-end of the cable into the MICROPHONE until it locks into place and connect the ¼ inch plug into either the MIC 1 or 2 jack on the AKJ7809.

2.To connect MICROPHONES via XLR mic cables, attach the XLR “female” end of the cable into the “male” three prong jack located at the base of your handheld MICROPHONE until it locks into place. Then connect the XLR “male” jack at the other end of the cable into either of the BALANCED MIC 1 or 2 inputs on the AKJ7809 rear panel. It should be obvious which sides of your XLR cable are male and female as there is only one possible connection.

3.To connect a GUITAR, connect a ¼ inch instrument cable from the GUITAR's ¼ inch output to the AKJ7809

¼inch GUITAR input.

4.To connect a KEYBOARD, connect a ¼ inch instrument cable from the KEYBOARD's ¼ inch output to the AKJ7809 ¼ inch KEYBOARD input.

To GUITAR

To KEYBOARD