Acesonic AM-825 user manual Rear Panel Function and Operation, 13 12 11

Rear Panel Function and Operation

17

16

15

14

13 12 11 10

CAUTION

cesonic

MIXING AMPLIFIER

BGM

RISK OF ELECTRIC

SHOCK DO NOT OPEN

MODEL:AM-825 INPUT:AC115V/230V

INPUT

S.VIDEO

WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK

S/N

DVD

INPUT

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTORE

CITYOF INDUSTRY,CA,USA

Cr

Cb

Y

INPUT

INPUT/OUTPUT

VIDEO

S.VIDEO

acesonic.com

BGM

AUX

DVD

VIDEO OUT

PC USB

Cr

Cb

Y

COMPONENT OUTPUT

PC INPUT

VIDEO

INPUT

UNLOCK

UNLOCK

VOLTAGE SELECT

L

1

A

LOCK

LOCK

A

AUDIO

115V

INPUT

R

RIGHT

LEFT

BGM

AUX

DVD

AUDIO OUT

AC INPUT

~230/115V 50/60Hz

OUTPUT

PRE

2

HIGH

MUSIC

B

B

L

3

+

RIGHT

-

-

LEFT

+

R

SPEAKER SYSTEM

LOW

MIXING

FUSE 250V/T10A

MIC

SUB

LINE

REC

INPUT

OUTPUT

GND

DO NOT REMOVE LOOP

4

5

6

7

8

9

1.AC 115/230V SELECT - Voltage selection switch. Push the switch right for 115V, and left for 230V. (Note: different regions of the world use different voltage strengths. Please check to make sure the correct voltage is selected for your area.)

2.AC inlet - Male inlet for power cable.

3.Fuse - Replaceable 250V/T10A fuse to protect the machine.

4.SPEAKER SYSTEM - One set of Speakon connector ports on the top, one set of banana connector ports on the bottom. These two types both provide audio output to stereo external speakers. Banana connector ports designed to be used with bare speaker wire as well as banana connectors. The LEFT and RIGHT outputs each consist of a positive (+, red) and negative (-, black) signal that correspond with the inputs on each speaker. (Please see connection diagram on page 10 for proper configuration)

5.MIC OUTPUT jacks - Outputs the microphone signal. High and low ports provide different thresholds of the signal.

6.SUBWOOFER OUTPUT jacks - Music port transfers the music-only signal; Mixing port transfer both music and vocal signal to the sub woofer.

7.LINE OUTPUT jacks - Extract the audio signal to another sound device. 8.REC OUTPUT jacks - Extract the audio signal to sound recording device.

9.EQ L/R INPUT and OUTPUT jacks - For external equalizer connection. Utilize to send and return AM-825 input signal to and from an external equalizer for further signal processing. Do not take off loop if not using these jacks(Please see page 10 for proper configuration)

10.AUDIO/VIDEO OUTPUT jacks - A set of AUDIO LEFT, AUDIO RIGHT, VIDEO, and S-VIDEO outputs:

R- AUDIO RIGHT RCA output. Connect to the audio right input on an external component.

L- AUDIO LEFT RCA output. Connect to the audio left input on an external component. VIDEO - VIDEO RCA output. Connect to the video input on an external component.

S-VIDEO-S-VIDEO (Y/C) output. Connect to the S-VIDEO input on an external component. 11,12,13.AUDIO/VIDEO INPUT jacks (BGM,AUX and DVD) -Each columm consists of a complete set of AUDIO LEFT, AUDIO RIGHT, VIDEO, and S-VIDEO.

R- AUDIO RIGHT RCA input. Connect to the audio right output from an external component.

L- AUDIO LEFT RCA input. Connect to the audio left output from an external component. VIDEO - VIDEO RCA input. Connect to the video output from an external component.

S-VIDEO-S-VIDEO (Y/C) input. Connect to an S-VIDEO output from an external component. 14.PC VIDEO INPUT- additional VIDEO RCA and S-Video input from computer-based devices. 15.PC USB CONNECTION - USB connection used to interface with computer-based devices. *Note- please install the driver before connecting to a computer. Otherwise your computer might not to able to recognize the mixing amplifier(Please see page 13 for more detail). 16.COMPONENT VIDEO OUTPUT jacks - RED, GREEN, BLUE component video RCA outputs. Connect to the red, green and blue component video inputs, respectively, on an external component.

17.COMPONENT VIDOE INPUT jacks(from BGM and DVD input) - RED, GREEN, BLUE

component video RCA inputs. Connect to the red, green and blue component video outputs,

respectively, from an external component. 7