The Singing Machine Pedestal CDG Karaoke System with built-in video camera & TV monitor, STVG-988

Page 19

RADIO AND OTHER OPERATIONS

AM/FM RADIO

1.Press the ON/OFF button.

2.Switch Function Selector to RADIO position.

3.Switch Band Selector to either AM or FM radio position.

4.Turn tuning knob to select desired station as indicated on dial.

5.Adjust Master Volume to your pleasure.

6.To turn the radio off, set Function Selector to CDG or AUX position.

SING ALONG - RADIO

1.Follow operating instructions for AM/FM radio.

2.Connect the supplied Microphone to either one of the Mic input jacks.

3.Adjust Master Volume and Mic Volume. Your voice will be combined with the radio

station output and will be heard through the speaker. Note: Echo effect cannot be activated in radio mode.

PUBLIC ADDRESS - USING A MICROPHONE

The unit can be used as a PA (Public Address System).

Public Address (PA) Operation Procedures

1.Connect the supplied Microphone to either one of the MIC input jacks.

2.Press the ON/OFF button to turn the unit on.

3.Set the Function Selector to AUX. Move the MIC VOLUME control to central position.

4.Move the ON/OFF switch located on the Microphone to ON position and speak or sing to the Microphone. The Microphone sensitivity and loudness could be adjusted as required by turning the MIC VOLUME control and/or MASTER VOLUME control.

5.To add depth or ambiance to your voice, adjust the ECHO control until the desired effect

is obtained.

Note: To prevent feedback or whistling from occurring, please be sure that the microphone is not too close to the unit.

SMM-107 WIRELESS MICROPHONE OPERATIONS

1)Unscrewing the bottom of wireless microphone.

2)Place a 9V battery in the compartment as indicated by the polarity symbols (+ and -) marked inside the compartment of the wireless microphone.

3)Replace the bottom of wireless microphone.

4)The switch on wireless microphone has three settings:

1.ON - The switch is in the top position. The microphone will function. The red indicator light is on.

2.STANDBY - The switch is in the middle position. The microphone will not function. The red indicator light is on.

NOTE: The purpose of this setting is to maintain a connection between the microphone and the Singing Machine when moving around the area in which it is being used.

3.OFF - The switch is in the bottom position. The microphone will not function. The red indicator light is off.

NOTE: To ensure long battery life, please make sure that the wireless microphones is set to the OFF position when not in use. When not in use for a long period of time, we recommend that you remove the DC 9-V battery.

18

Image 19
Contents Page Ventilation Warning Dripping WarningImportant Safety Instructions Antenna Introduction Installation Tighten a self tapping screw at the control panel top Control Locations ON/OFF LED Front ViewRear View Side View Wireless Microphone Making the Connections Connecting PowerConnecting to Your Headphone Connecting to Your TVCommon Ways to Configure Your TV or VCR Audio Connection Connecting a Video Component for InputMonitor Selector Connecting AN Audio Component for InputVideo OUT Selector CD or CD+G Operation Program PLAY/PAUSE ModeStop Mode RepeatAM/FM Radio SMM-107 Wireless Microphone OperationsPublic Address Using a Microphone Radio and Other OperationsSafety Information Wireless Microphone InformationFCC Notice CD Player Cleaning the CD Laser LensCleaning Disc Compact DiscProblem Possible Cause Solution Trouble Shooting GuideVideo OUT Specifications CDG Singing Machine Karaoke Glossary of TermsPage Page Singing Machine Company, Inc