Troubleshooting Guide
Should this unit exhibit a problem, check the following before seeking service:
No Power
•Power is not on; press the POWER ON/OFF button to turn power on.
•Make sure the unit is connected to AC power.
No Sound – General
•Master Volume is set to minimum; raise volume.
•Correct Function was not selected; select using the FUNCTION button.
No Sound – If connected to a TV
•Volume on the TV is muted or too low.
•White and red audio plugs are not connected properly; see page 4.
•Correct source (usually AV) was not selected in the TV’s menu.
CD section is not working properly.
•No disc inserted, or disc inserted upside down; insert disc correctly.
•Make sure to use a CD, CD+G, or when downloaded music has been burned, ensure the disc is a CDR or CDRW.
•Lens is dirty. Disconnect the power and clean the lens with a CD lens cleaner.
•Moisture has formed. Turn the unit off, unplug the unit from the outlet and allow
No sound from the microphone.
•Make sure it is firmly connected to the MIC1 or MIC2 jack.
•Make sure it is turned on, see page 7.
•Make sure the MIC VOLUME control is not on the lowest setting.
•MASTER VOLUME is set to minimum; raise volume.
File(s) on USB jack not playing.
•The file is corrupted; replace file.
•The file is not in a format this unit will play.
•The connected USB device is not supported by the product.
The Bluetooth device cannot be paired or connected with the unit.
•You have not activated the Bluetooth function of your device; see page 11 or refer to the Bluetooth device’s user manual.
•The unit is not in pairing mode; see page 11 to pair.
The Music playback is not available on the unit after successfully connecting the Bluetooth.
• Ensure your Bluetooth device can support the A2DP Bluetooth profile.
The unit will not record.
• No SD Card is inserted, or SD Card is full. Move all recordings to your computer to make room.
21