Contents, Microphone Details | The Singing Machine SMM-106 specification

ENGLISH

1.Wireless Microphone x 1

2.Microphone Receiver x 1

3.Microphone Antenna x 1

4.Microphone Cord with Cannon Jack and ∅6.3 mm Jack x 1

5.∅3.5 mm Jack adapter x 1

1		2
3	4	5

Congratulations on your purchase of a Singing Machine SMM-106 Wireless Microphone! We at the Singing Machine know that it will provide you and your friends with endless hours of entertainment. Inside you will find instructions on how to use and maintain your SMM-106.

In the unlikely event that you will be using your SMM-106 Singing Machine Wireless Microphone in an area of high radio frequency interference, you may need to temporarily make use of the non-wireless option by attaching it to the included microphone cord.

Microphone Details

Settings

The switch on your Singing Machine SMM-106 Wireless Microphone has three settings:

1.ON - The switch is in the top position. For wireless use, the microphone will function. The red indicator light is on. The microphone will use battery power.

2.MIC - The switch is in the middle position. For non-wireless use, the microphone will function. If the battery is removed from the microphone, the red indicator light will not be turned on.

3.OFF - The switch is in the bottom position. The microphone will not function. The red indicator light is off. The microphone will not use battery power.

Important Note: When the microphone switch is set to OFF, noise may be generated from the karaoke machine. Please make sure to reduce both the MASTER VOLUME and MIC VOLUME to the low level OR switch off the receiver before turning off your microphone.

Instructions For Wireless Use

1.Insert one (1) AA battery into the Microphone by unscrewing the bottom.

2.Plug the Antenna into the bottom of the Microphone.

3.Insert one (1) AA battery into the slot located in the back of the Receiver.

4.Set the switch on the Microphone to the middle MIC position.

5.Plug the Receiver into the Microphone Input Jack of your Singing Machine karaoke machine.

6.Set the switch on your Singing Machine karaoke machine to the ON position.

7.Set the switch on the Receiver to the ON position.

8.Set the switch on the Microphone to the top ON position.

Your Singing Machine SMM-106 Wireless Microphone is now ready for wireless use!

NOTE: If you encounter minor interference during wireless use, please adjust the tuning screw on the Receiver, and roll up the plastic Receiver Antenna. Excessive interference will require temporary non-wireless use.

Instructions For Non-Wireless Use

1.Plug Cannon Jack into the Microphone instead of the Antenna, making sure that the three holes line up with the three prongs in the base of the Microphone.

2.Plug the Microphone Cord into the Microphone Input Jack of your Singing Machine karaoke machine.

3.Set the switch on your Singing Machine karaoke machine to the ON position.

4.Set the switch on the Microphone to the MIC position.

Your Singing Machine SMM-106 Wireless Microphone is now ready for non-wireless use!

NOTE: For best non-wireless performance, please remove batteries from the Microphone prior to non-wireless use.