Peavey TNT, TKO manual Ground Lift

16EXTERNAL SPEAKER OUTPUT


QPXFSFE
PVUQVU
GPS
QPXFSJOH
B
QBTTJWF
FODMPTVSF

17EFFECTS LOOP

The Send Jack provides a pre amp output that may be used to drive slave amplifiers and external effects processors. The Return Jack provides a power amp input for the last effect in the chain. NOTE: When using the unit as a slave power amplifier, the Return Jack should be used as the input.

18GROUND LIFT

5IJT
CVUUPO
JT
QSPWJEFE
UP
QSFWFOU
B
HSPVOE
MPPQ
UIBU
NBZ
SFTVMU
JO
IVN
OPJTF
8IFO
EFQSFTTFE
*/
position), Ground Lift is engaged.

19DIRECT INTERFACE (DI)

This is a built-in, balanced Direct Interface is used to send a buffered, unprocessed signal to an external mixer. NOTE: The Direct Interface features failsafe circuitry, which runs on standard 48-volt phantom power from the mixer. This allows the DI to continue functioning even in the event of a blown circuit breaker or amplifier shutdown. In the event of a failsafe operation, the mute switch will be bypassed. This circuit is active, even when the power switch is in the "Off" position.

13