SPECIFICATIONS
NOTE: All specifications are typical unless otherwise noted.
0 dBV = 1 volt RMS
0 dBu = .778 volts RMS
All specs are referenced to nominal output level (0 dBV) unless otherwise noted.
All measurements are wideband 20 Hz to 20 kHz unless otherwise stated.
All control settings are nominal (50% rotation) unless otherwise noted.
CHANNEL
Equivalent Input Noise:
Frequency Response:
(to speaker outputs)
±1 dB 20 Hz to 20 kHz
Distortion:
(1 kHz)
Less than .015%
Input Impedance:
Low Z Bal = 1.7 K ohms
Line Input = 13 K ohms
High EQ:
±12 dB @ 10 kHz minimum center detent flat ±2 dB
Mid EQ:
±12 dB @ 600 Hz minimum center detent flat ±2 dB
Low EQ:
±12 dB @ 50 Hz minimum Center detent flat ±2 dB
Nominal Channel Gain:
Low Z = 20 dB
Line = 0 dB
Minimum Channel Gain:
Low Z =
Line =
Maximum Channel Gain:
Low Z = 40 dB
Line = 20 dB
Nominal Input Level:
Low Z =
Line = 0 dBV
Minimum Input Level:
Low Z =
Line =
Maximum Input Level:
Low Z = +6 dB
Line = +26 dB
Phantom Power:
+48 V DC
GRAPHIC EQUALIZER:
Filter Bandwidth:
1 octave
Filter Frequencies:
(ISO Stds.)
63 Hz, 125 Hz, 250 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz
Filter Q:
1.57
Maximum Boost & Cut:
+ 6 dB,
Noise:
Distortion:
(1 kHz)
Less than .005%
Frequency Response:
±1 dB 7 Hz to 40 kHz
Input Level:
Nom = 0 dBV (1.0 V RMS)
Max = +19 dBV ( 9 V RMS)
Output Level:
Nom = 0 dBV (1.0 V RMS)
Max = +19 dBV ( 9 V RMS)
Input Impedance:
10 K ohms
8