Three + TWO Year Limited Warranty, Thd

shall be available on all channels and be switched on inputs 1 and

2.There shall be included a security cover protecting the main controls on the front panel with marking zones for each input. The master section shall be equipped with gain management computer logic for seamless operation. There shall be a balanced mic or line master output with switch. In addition, there is a master, unbalanced auxilliary output.

There is a master/slave linking connection and switch on the back panel for connection to

additional Automix 4 units, and also the Automix 2, as well as the SMR™ 821 mixer. All audio connections shall be made with removable “euro” type connectors.

The mixer shall have a frequency response of 75 Hz to 20 kHz +/- 1 dB. It shall have an EIN of -128 dBu and the total harmonic distortion shall be less than 0.1% at +4 dBu (22 Hz to 22 kHz BPF). The maximum line output level shall be +21 dBu (hi-Z load), +18 dBu (600 load).

The unit shall be packaged in a rugged metal chassis 19” wide

by 1.75” high by 9.38” deep. The unit shall operate from 120 VAC, 60 Hx domestic and from 230 VAC, 50/60 Hz, export. The unit shall be a Peavey Architectural Acoustic Division model Automix 4.

THREE + TWO YEAR LIMITED WARRANTY

NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting

Peavey Electronics Corporation, P.O. Box 2898, Meridian, Mississippi 39301-2898.

*US Patent no. 5,652,800

SPECIFICATIONS

Test Conditions:

120 Vrms, 60 Hz line voltage maintained throughout testing. Reference: 0 dBu = 0.775 Vrms.

INPUT SPECIFICATIONS

EIN:

-128 dBu (Rs = 150 Ohms), typical

Preamp Gain Range:

10 dB - 65 dB (MIC inputs)

-13 dB - 44 dB (LINE inputs)

Input Impedance:

2K Ohms (MIC inputs) >10K Ohms (LINE inputs) >10K Ohms (INSERT inputs)

Priority (channels 1 and 2):

0 dB to 9 dB

Phantom Power:

+48 Volts

Input sensitivity:
MIC inputs	-61 dBu
LINE inputs	-40 dBu
INSERT inputs	+4 dBu

Maximum Input Level:

MIC inputs	+12 dBu
LINE inputs	+30 dBu
INSERT inputs	+21 dBu

Common Mode Rejection:

>70 dB 20 Hz – 20 kHz

OUTPUT SPECIFICATIONS Frequency Response:

75 Hz (–3 dB) to 20 kHz (–1 dB) (at +4 dBu; ref: 1 kHz; 75 Hz HPF)

THD:

<0.1% at +4 dBu (22 Hz - 30 kHz BPF)

Signal/Noise:

(Rs = 150 Ohms; 30 kHz LPF) >85 dB (all controls fully CCW)

Output Impedance:

<200 Ohms

Nominal Output Level:

LINE level output	+4 dBu
MIC level output	–26 dBu
INSERT outputs	+4 dBu

Maximum Output Level:

LINE level output	+21 dBu (hi-Z load)
	+18 dBu (600 load)
MIC level output	–9 dBu (hi-Z load)
	–12 dBu (600 load)
INSERT outputs	+21 dBu (hi-Z load)

GENERAL SPECIFICATIONS Channel Clip LED:

Red LED lights 2 dB before clipping Also lights to indicate mute on channel 1 and 2 inputs

Output Level Indicators:

Red LED lights 2 dB before clipping Yellow LED lights at +4 dBu Green LED lights at –16 dBu

Power Requirements:
120	Vrms, 60 Hz	Domestic
230	Vrms, 50/60 Hz	Export

15 Watts nominal

Dimensions: 1.75" x 19" x 9.38"

(45 mm x 483 mm x 238 mm)

Weight:

7.5lbs

3.4kg

Features and specifications subject to change without notice.

Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5376 • FAX (601) 486-1678 • http://aa.peavey.com

																																								Printed in the U.S.A. 6/00
	80304715																																							Printed in the U.S.A. 6/00
	80304715

4 specifications

The Peavey 4 is an exceptional bass guitar that has garnered a solid reputation among musicians for its impressive sound quality, playability, and innovative features. Designed with the needs of modern bass players in mind, the Peavey 4 stands out in both performance and versatility.

One of the main features of the Peavey 4 is its solid construction. The guitar is typically crafted from high-quality woods such as mahogany or alder, providing a rich tone and excellent resonance. The choice of materials contributes to the instrument's durability and longevity, making it a reliable choice for both rehearsals and live performances.

Equipped with powerful pickups, the Peavey 4 delivers versatile sound options. It commonly features dual humbucking pickups, which reduce unwanted noise and provide a fuller, warmer tone. This setup allows for a wide array of tonal variations, from punchy slap tones to deep, smooth sounds suitable for jazz and rock genres.

The instrument’s active electronics provide further tonal control. Players will appreciate the built-in equalization system that allows them to tailor their sound to fit different musical settings. Whether boosting the low end for a heavier sound or adjusting the treble for a more cutting edge, the active electronics enhance the overall playing experience.

Additionally, the Peavey 4 boasts a sleek and ergonomic design that ensures comfort during extended playing sessions. Its profile is conducive to easy access to higher frets, making it ideal for advanced techniques and soloing. The neck is often designed with a smooth finish and a comfortable playability, which helps in achieving faster playing speeds.

Another notable technology featured in the Peavey 4 is its low-wind production of the pickups. This innovation allows for a more dynamic range of sound without the risk of distortion that can sometimes occur with traditional pickups. This leads to cleaner sound reproduction, which is essential in studio settings.

The Peavey 4 is not just about sound; it also offers aesthetic appeal. Available in various finishes and colors, players can choose a style that meets their personal preferences.

Overall, the Peavey 4 merges quality craftsmanship with advanced technology, making it an outstanding option for bass players seeking a reliable and versatile instrument. Whether on stage or in the studio, the Peavey 4 truly excels as a powerful tool for any bassist's musical expression.