Peavey specifications Specifications, Peavey Studio Pro M2

SPECIFICATIONS Peavey Studio Pro™ M2

Element Type:

Pressure Gradient Transducer Polar Pattern:

Selectable: omni, cardioid, figure 8 Front-to-back Rejection:

20 dB typical in cardioid pattern Rated Output Impedance:

200 Ohms

Recommended Load Impedance:

1000 Ohms

Frequency Response:

30 – 20,000 Hz

Sensitivity (mV/pascal):

12.5 mV/20 mV/15 mV*

Self Noise (Equivalent Noise Level SPL):

20/16/18 dB* typical, A-weighted (per IEC 651)

Maximum SPL for 0.5% THD:

145/140/144 dB* at 1 kHz Power Requirements:

48 Volts

Current Consumption:

3.0mA Connector: 3-pin XLR

Polarity:

Positive pressure on diaphragm produces positive voltage at pin 2 relative to pin 3

Dimensions:

2.280 inches (57.91 mm) maximum body diameter, 7.80 inches (198.12 mm) long

Packaging:

Compact carrying case

Net Weight:

1.2pounds (545 grams) Optional Accessory: Studio Pro Shock Mount

Features

•Large gold-plated dual diaphragm microphone

•Pressure-gradient transducer

•Switchable polar pattern

•Switchable low frequency roll-off

•Switchable 10 dB pre-attenuation

•Ideal as main and as support microphone in most recording situations

Application Hints

•Announcer’s studio, vocal, and instrument mic for broadcasting, dubbing, voice-over

•Overhead

•Spot mic for

-wind instruments

-strings

-piano

-percussion

Description

The Studio Pro M2 is a large format side-address condenser microphone with a unique frequency and transient response. It has a selectable polar response for omni, cardioid or figure 8 patterns. It is an excellent choice for most applications in studios, for broadcasting, film and television.

* omni, cardioid, figure 8