Front panel - PRO 2
(6) | (7) | (8) | (13) |
(1) (2) | (3) | (4) | (5) | (9)(10) | (11) | (12) | (14) | (15) (16) (17) | (18) | (19)(20) |
(1)VOLUME SLIDER Controls the main volume of the instrument.
(2) DATA SLIDER | Adjusts values shown in the display when using programmable functions. |
(3)PAGE UP/DOWN
| BUTTONS | Use these buttons to step through the various functions in the PERF EDIT and |
|
| MASTER/MIDI menus. |
(4) EQ SECTION | Provides accurate control of the instrument's tone. | |
(5) EQ ON/OFF | Activates and deactivates the EQ section. | |
(6) | STORE | Press this button when you are ready to store the changes you have made. Complete |
|
| storage by choosing a bank, |
(7) | SPLIT | Turning this button on will split the keyboard into separate left and right parts. While |
|
| the button is held you can choose the split note and the lower, (left) sound. |
(8) TUNE | Use these buttons to adjust the tuning of the instrument. |
(9)MASTER/MIDIThis button provides access to the various MIDI functions of the instrument plus some additional master features such as "Restore Performances" and "EQ Lock".
(10) PERF EDIT | Use this button to edit a variety of performance features such as reverb and effect |
| levels, pedal functions and alternative tunings. Any changes made here will be |
| memorized when the performance is saved. |
(11) TRANSPOSE | Increases or decreases the overall pitch of the instrument in |
| increments |
(12)SELECTION BUTTONS Use these buttons to select sounds or performances, (depending on the state of the SOUNDS/PERF button).
(13) VARIATION | Pressing this button in SOUNDS mode will provide two variations of the current |
| sound. |
(14)SOUNDS/PERFThis button switches between SOUNDS mode and PERFORMANCE mode.
(15) | REVERB | Use this button to select a reverb type. When all LEDs are off the reverb is cancelled. |
(16) | EFFECT | Use this button to select an effect type. When all LEDs are off the effects are cancelled. |
(17) TOUCH | This button adjusts the touch of the keyboard according to your playing style. Selecting | |
|
| USER allows you to vary the touch with the DATA slider. |
(18)PLAY AND RECORD The on board digital recording section, (sequencer) allows you to record what you play. See the dedicated "Sequencer/recorder" section of this manual for more details.
(19) | LOCAL OFF | This isolates the keyboard from the internal voices allowing the instrument to be |
|
| connected in a "midi loop", (a typical configuration for using external sequencers.) |
(20) | DEMO | Activates the factory programmed demonstration of the internal sounds. |