O N T P a N E L | Peavey backstage specs

F R O N T P A N E L

(1) Input Jack

Use this 1/4" jack to connect your guitar. Connect your guitar prior to turning power on to the amplifier.

(2) Overdrive

This knob allows control over the level of overdrive. The Overdrive On/Off (3) switch must be depressed or engaged for you to hear overdrive.

(3)Overdrive On/Off

In the Off position‚ the Backstage will produce a nice clean sound. Once engaged‚ look out‚ this little amplifier will rock. Use the Overdrive knob (2) to control the level of Overdrive.

(4) Volume

This control sets the overall level of the Backstage.

(5) High EQ

This control allows you to dial in the amount of high-end for your guitar.

(6) Low EQ

This control adds bottom-end to your sound. Use to fatten up the sound of your guitar.

(7) Tape/CD Input

This standard 1/4" input jack allows you to connect a tape or CD player to your Backstage and play along.

(8) Headphone Output

This standard 1/4" output jack allows you to connect standard headphones to the Backstage. When headphones are connected to the Backstage‚ the speaker is automatically turned off.

(9) Power LED

This LED illuminates when power is supplied to the Backstage.

(10) Power Switch

This two-way rocker switch applies power to the unit when placed in the ON position.