Peavey 6505 212 Combo owner manual Ground Switch, External Speaker Jack, Remote Footswitch Jack

Page 10

Rear Panel

19

22

18

20

21

 

Ground Switch (18)

This three-position, rocker-type switch should be operated in the center (zero) position for most applications. If hum or noise is noticed coming from the speaker enclosure(s) with the ground switch in the center position, place the ground switch to positive or negative (+ or -) to minimize hum. Should a hum/noise problem continue, consult your authorized Peavey Dealer, the Peavey factory or a qualified service technician.

NOTE: The ground switch is not functional on 220/240 volt models.

External Speaker Jack (19)

Provided for the connection of an external speaker enclosure. Minimum speaker impedance is 16 ohms.

Remote Footswitch Jack (20)

Provided for the connection of the supplied remote footswitch. When the footswitch is plugged into the Remote Footswitch jack, the Channel Select switch (3) must be pressed to the “in” position for remote selection of the LEAD or RHYTHM channel (left footswitch button) or On and Off operation of Reverb (right footswitch button).

Effects Send/Effects Return (21, 22)

Signals are supplied to outboard effects or signal processing units by patching from the EFFECTS SEND

[21]output into the outboard unit(s) and back into the EFFECTS RETURN [22] input using shielded cable with 1/4" phono jacks. Only non-gain effects devices (chorus, reverb, delay, etc.) should be used in the effects loop.

NOTE: LINE CORD- 120V PRODUCTS ONLY

For your safety, we have incorporated a three-wire line (mains) cable with proper ground facilities. It is not advisable to remove the ground pin under any circumstances. If it is necessary to use the 6505 212 without proper grounding facilities, suitable grounding adapters should be used. Greatly reduced shock hazard exists when the unit is operated with proper grounded receptacles.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Page Important Safety Instructions Sound Level dBA, Slow ResponseBewahren SIE Diese Sicherheitshinweise AUF Wichtige SicherheitshinweiseInstructions Importantes DE Securite ⁄ 4 ou inférieurInstrucciones Importantes Para SU Seguridad English Tube Guitar AmplifierCrunch Select Switch Channel Select SwitchBright Switch Inputs 1Equalization 8, 9 Standby SwitchPower Switch Resonance & Presence 13External Speaker Jack Ground SwitchRemote Footswitch Jack Effects Send/Effects Return 21Speaker Connection 6505 212 Combo Tube Guitar Amplifier Preamp Low Gain Input -6 dB pad Page Peavey Electronics Corporation Limited Warranty 2005

6505 212 Combo specifications

The Peavey 6505 212 Combo is a powerful and versatile amplifier that has gained a reputation among guitarists for its high gain and robust tonal qualities. Originally designed with heavy metal in mind, the 6505 series has also found favor across various genres, thanks to its dynamic sound capabilities and reliability.

One of the standout features of the 6505 212 Combo is its dual-channel design, which allows players to easily switch between clean and distorted sounds. Each channel has its own gain, bass, mid, treble, and reverb controls, providing extensive tonal shaping possibilities. The clean channel offers a warm, rich sound, while the lead channel delivers intense distortion and sustain, making it perfect for heavy riffs and solos.

At the heart of the Peavey 6505 212 Combo are its two 6L6 power tubes, which provide a full-bodied sound with excellent headroom. This complements the amp’s four 12AX7 preamp tubes, further enhancing its gain structure and tonal richness. This combination allows the amplifier to produce a broad range of sounds, from crystal-clear cleans to aggressive, saturated overdrive.

The cabinet houses two 12-inch speakers, which deliver a punchy, powerful output that can easily fill large venues. The speakers are designed to handle high volumes while maintaining clarity, ensuring that every note and nuance is heard, even in a full band setting. The combo design makes it convenient for transport while still delivering the full impedance performance expected from a standalone head and cabinet setup.

Another notable feature is the presence and resonance controls, enabling players to fine-tune their sound in the context of their band's mix. The built-in reverb adds an extra layer of depth and ambiance to the sound, making it suitable for various musical styles.

Additionally, the 6505 212 Combo is equipped with a buffered effects loop, allowing easy integration of pedals while maintaining the integrity of the signal. This design consideration ensures that users can experiment with their effects while still enjoying the amp’s natural character.

Overall, the Peavey 6505 212 Combo stands out for its reliability, tonal versatility, and powerful performance, making it a popular choice among professional musicians and hobbyists alike. With its intuitive controls and robust construction, it delivers an outstanding playing experience that can adapt to numerous musical contexts.
Top Page Image Contents