NASHVILLEª 1000 Specifications | Peavey instruction

NASHVILLEª 1000 SPECIFICATIONS:

Power Amplifier Section:

Rated Power and Load:

300 W RMS into 4 Ohms (with DDT compression)

190 W RMS into 8 Ohms (with DDT compression)

2 Ohms operation not recommend

Frequency Response:

+0,-3 dB, 20 Hz to 20 kHz @ 250 W RMS into 4 Ohms

Pre EQ Patch Send:

Load Impedance: 10 k Ohms or greater

Nominal Output Level: -14 dBV, 0.2 V RMS

Pre EQ Patch Return:

Impedance: High Z, 220 k Ohms

Designed Input Level: -14 dBV, 0.2 V RMS

(Switching jack provides send to return connection when not used.)

Total Harmonic Distortion:

Less than 0.3%, 1 W to 300 W RMS, 20 Hz to 20 kHz, 4 Ohms

DDT Dynamic Range:

Greater than 20 dB

DDT Maximum THD:

Below 0.5% THD for 6 dB overload

Below 1% THD for 20 dB overload

Hum and Noise:

Greater than 95 dB below rated power (A-weighted)

Power Consumption:

360 W, 50/60 Hz, 120 VAC (domestic)

Preamp Section:

The following specs are measured @ 1 kHz with the controls preset as follows:

Master Gain @ 10

Low EQ @ 0 dB

Mid EQ @ 0 dB Mid Shift @ 600 Hz High EQ @ 0 dB Presence EQ @ 0 dB Reverb @ 0

Nominal levels are with Pre Gain @ 5 Minimum levels are with Pre Gain @ 10

Preamp High Gain Input (no pad):

Impedance: High Z, 220 k Ohms

Nominal Input Level: -24 dBV, 60mV RMS

Minimum Input Level: -48 dBV, 4 mV RMS

Maximum Input Level: +8 dBV, 2.5 V RMS

Preamp Low Gain Input (-10 dB pad):

Impedance: High Z, 68 k Ohms

Nominal Input Level: -14 dBV, 188 mV RMS

Minimum Input Level: -38 dBV, 13 mV RMS

Maximum Input Level: +18 dBV, 8 V RMS

Post EQ Patch Send:

Load Impedance: 10 k Ohms or greater

Nominal Output Level: -9 dBV, 0.35 V RMS

Post EQ Patch Return:

Impedance: High Z 1M Ohms

Designed Input Level: -9 dBV, 0.35 V RMS

Preamp Output:

Load Impedance: 1 k Ohms or greater

Nominal Output Level: 0 dBV, 1V RMS

Power Amp Input:

Impedance: High Z, 25 k Ohms

Designed Input Level: 0 dBV, 1V RMS

(Switching jack provides preamp output to power amp input connection when not used.)

System Hum and Noise @ Nominal Input Level:

(20 Hz to 20 kHz unweighted) Greater than 80 dB below rated power

Equalization:

Low: ±15 dB @ 45 Hz, shelving

Mid: ±15 dB @ mid shift frequency, boost/cut

Mid Shift: 150 Hz to 1.5 kHz

High: ±15 dB @ 6 kHz (special EQ)

Presence: ±15 dB @ 10 kHz, shelving

External Footswitch Functions:

Select Effects: Post EQ Effects Loop defeat

Reverb: Reverb defeat

Dimensions and Weight (H x W x D):

20.5" x 26.5" x 11.375"

52.07 cm x 67.31 cm x 28.90 cm

Weight:

57.1 lb. (25.90 kg)