Boss Audio Systems ME-50B FILTER/TONE pedal, Octave UP/OCTAVE Down, WAH UP/T.WAH DOWN/T.WAH Edge

Page 10

Using the Effects

FILTER/TONE

FILTER / TONE indicator

T.WAH EDGE:

Gives a filter with a stronger effect.

Pedal indicator

FILTER / TONE pedal

Included here are eleven different effects that alter the particular characteristics of the bass sound itself.

You can select and use any one of these effects at a time.

SENS/BOTTOM knob

Adjusts the sensitivity when the filter is being altered.

DEPTH/TONE knob

Adjusts the reference frequency for the wah effect.

RESONANCE/E.LEVEL knob

Adjusts the amount of wah effect at frequencies near the reference frequency. Turning the knob to the left widens the range of frequencies in the vicinity of the reference frequency in which the wah effect is to be produced, while turning the knob to the right narrows this range.

OCTAVE UP/OCTAVE DOWN

This effect creates a fatter, thicker sound by adding to the input sound the same sound raised one octave (OCTAVE UP) or lower one octave (OCTAVE DOWN).

*This effect does not function correctly if two or more notes are played simultaneously.

SENS/BOTTOM knob

Adjusts the volume of the direct sound.

DEPTH/TONE knob

Adjusts the tone of the octave sound. Turn the knob to the left for a milder sound or to the right for a sharper sound.

FILTER/TONE pedal

The filter tone is alternately switched on and off each time you press the pedal. The indicator lights up when the effect is on.

TYPE knob

Selects the effect to be used from the eleven different effects that are available.

T.WAH UP/T.WAH DOWN/T.WAH EDGE

This effect alters the wah effect in response to the level at the time the bass is played.

T.WAH UP:

The filter shifts to higher frequencies in response to the input.

T.WAH DOWN:

The filter shifts to lower frequencies in response to the input.

RESONANCE/E.LEVEL knob

Adjusts the volume of the octave sound.

SLOW GEAR

This produces a volume-swell effect (similar to how a violin is played.

SENS/BOTTOM knob

Adjusts the sensitivity of the slow gear effect. As the knob is turned more to the left, there is less response to weaker picking, so the effect is expressed only when strong picking is used.

DEPTH/TONE knob

This adjusts the time needed for the volume to reach its maximum from the moment you begin picking.

RESONANCE/E.LEVEL knob

Adjusts the volume of the effect sound.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Main features Page Page Maintenance Power Supply Use of BatteriesPlacement Additional PrecautionsContents Playing Sounds Installing BatteriesMaking the Connections Adjusting the Volume Turning on the PowerTurning Off the Power If There Is No Sound/If the Volume is LowUsing the Effects About the Effect Connection SequenceType knob THRESHOLD/SUSTAIN knobLevel knob WAH UP/T.WAH DOWN/T.WAH Edge FILTER/TONE pedalOctave UP/OCTAVE Down Slow GearEnhancer DefretterBottom BOOST/MID SHAPE/HOLLOW DRIVE/SYNTH pedal DRIVE/SENS knobTONE/CUTOFF knob When NATURAL-HI-BAND Drive is selectedLEVEL/RESONANCE knob TAP DLY DELAY/MOD pedalHold DLY Flanger PhaserCHO+DELAY ChorusUsing the .TAP DLY Function Using the Hold DLY FunctionAdding a Delay Synchronized to the Performance Tempo Executing Write Procedures p After the Tempo Has Been Set Using the Pedal as a Volume Pedal PedalTurn the knob to Kick Drum Using the Sound Hold FunctionUsing the Kick Drum Function Lift up the expression pedal once, and press it down againMID Freq knob LOW knobMID knob High knobSwitching Between Manual and Memory Mode About the PatchSwitching Numbers Write ProcedureCalling Up and Using Stored Tones Patch Change Switching BanksAbout the Hold DLY About the Tempo SettingAbout Tone Changes About the TAP DLYChanging the Patch Settings Patch Edit mode FILTER/TONE DRIVE/SYNTH DELAY/MODULATIONTuning the Bass Bypass/Tuner Convenient FunctionsSwitching the Compressor/ Limiter On and Off Using the Foot SwitchAdding an Effect Synchronized to the Performance Tempo Practicing Along with CDs and MDs AUX AUX in is a stereo mini jackAdjust the Pedal Mode SW Adjusting the Expression PedalAppendices To 6. is displayed When Bank is pressed TroubleshootingNo Sound/Volume is Low Patches Cannot Be ChangedSpecifications ME-50B Bass Multiple EffectsPatch List BankFactory Settings Tone Level SensDELAY/MODULATION Blank Chart Master Blank Chart Blank Chart Index Avis G6017377

ME-50B specifications

Boss Audio Systems ME-50B is a versatile and highly regarded multi-effects processor designed specifically for bass guitarists. Known for its robust build quality and rich feature set, the ME-50B offers an array of tools that cater to both live performance and studio environments, making it a popular choice among professional and amateur musicians alike.

One of the standout features of the ME-50B is its user-friendly interface. The pedalboard layout consists of six selection knobs and six footswitches, enabling effortless access to an extensive range of effects. This intuitive design allows bassists to quickly adjust settings and switch between effects, making it ideal for performances where spontaneity is crucial.

The ME-50B is equipped with a comprehensive selection of effects, including various distortions, overdrives, and compression options. Its built-in chorus, flanger, and phaser effects add depth and texture to the bass sound, allowing musicians to explore a wide palette of sonic possibilities. Additionally, the pedal features a powerful EQ section, providing control over frequency levels, which enhances tonal shaping.

Technologically, the ME-50B incorporates COSM (Composite Object Sound Modelling) technology, which delivers high-quality sound processing by accurately replicating the characteristics of classic amplifiers and cabinets. This ensures that players can achieve a range of tonal signatures, from vintage to modern, with ease. Furthermore, the processor includes a built-in tuner, making it a practical tool for on-the-go musicians.

Another significant characteristic of the ME-50B is its loop function, which enables artists to create and layer sounds in real-time. This feature is especially valuable for practicing and composing, allowing players to build complex arrangements with multiple effects.

The ME-50B also supports battery and AC power options, providing flexibility for use anywhere. Its sturdy construction means it can withstand the rigors of gigging, while its relatively lightweight design facilitates portability.

In conclusion, the Boss Audio Systems ME-50B is an exceptional multi-effects processor designed with bassists in mind. Its array of features, including a user-friendly interface, diverse effects, COSM technology, and practical functionality, make it an indispensable tool for musicians looking to enhance their sound. Whether in the studio or on stage, the ME-50B continues to be a reliable choice for bass guitar players seeking creativity and versatility.
Top Page Image Contents