Grizzly H3124 instruction manual Tuning Machines, Tailpiece, To install the tuning machines

Page 14

Tuning Machines

To install the tuning machines:

1.Slide the tuning machines through the back of the headstock.

2.Place the washer and barrel nut over the tun- ing post and tighten with a 10mm socket.

Figure 13. Tuning machines installed in the

back of the headstock

Tailpiece

To install the tailpiece:

1.Insert the tailpiece screw through the tail- piece lug.

2.Set the tailpiece on the tensioning hoop, as shown in Figure 14, and tighten the nut against the tailpiece lug.

Tailpiece

Tailpiece Lug

Figure 14. Tightening tailpiece screw into lug.






-12-						H3124 Banjo Kit

Image 14

Contents Banjo KIT Page Table of Contents Safety Introduction Parts Inventory Peg BagRecommended Tools & Supplies SandingSupplies/Tools Wooden Rim NeckFingerboard BridgePainting/Finishing Tips FinishingWooden Rim Neck To install the tone ring AssemblyTo install the bracket hook lugs Bracket Hook LugsTo install the banjo head Banjo HeadTo attach the neck to the banjo rim To install the coordinator rodCoordinator Rod 5th String Peg To install the 5th string peg5th String Nut To cut the 5th string slot in the nutTo install the tailpiece Tuning MachinesTo install the tuning machines TailpieceWinding Strings Bridge PlacementTo install the banjo strings To place the bridgeString Height To check the string heightTuning Important issues to consider when tuning a banjoGeneral Aftermarket AccessoriesReference Info H3124 Banjo Kit Warranty & Returns Warranty Card Grizzly INDUSTRIAL, INC BOX BELLINGHAM, WAPage Call Today For a Free Full Color Catalog