Behringer PMH5000, PMH1000, PMH3000 user manual Wiring Examples, Speakon pin assignment

EUROPOWER PMH1000/PMH3000/PMH5000

	OUTPUT B	OUTPUT A
	+1	+1
8 Ω	-1	-1	Ω
		8
4 Ω		4 Ω
	BRIDGE
	+1
		16 Ω
		8 Ω
	+2

Fig. 4.6: SPEAKON® pin assignment

5. WIRING EXAMPLES

Fig. 5.1: Stereo operation

For stereo operation the POWER AMP switch must be set to its upper position (MAIN or MAIN L/MAIN R). Outputs A and B provide the stereo main signal for passive speakers. The preamp monitor output is connected to two parallel active speakers, which are used as on-stage monitors. Use the footswitch to enable/disable the effects processor.

Fig. 5.2: Bridged mono operation

This illustration shows the power mixer with a sub-woofer connected to OUTPUT B. For a bridged mono operation to

OUTPUT B, the AMP MODE selector switch must be set to its lower position “BRIDGE”. A separate stereo power amp (BEHRINGER EUROPOWER EP1500) connected to the preamp main outputs delivers the stereo main signal. Two active monitor speakers for on-stage operation are connected to the preamp monitor output.

10 5. WIRING EXAMPLES