Behringer DSP2024P user manual Dynamic effects

Page 13

VIRTUALIZER PRO DSP2024P

AUTO PANNING: This sound effect, which was very popular in the beginnings of stereo technique, is achieved by allowing a sound source (often the lead guitar or a synthesizer) to wander from one end of the stereo image to another or by just letting it wander repeatedly.

Tab. 2.3: Functioning of the modulation and pitch shifter effects’ parameters

2.4 Dynamic effects

COMPRESSOR/LIMITER: When the signal level exceeds the level control limit of the signal-processing unit, it must be limited dynamically to avoid distortions. This is achieved by installing a compressor or a limiter. The limiter abruptly limits the signal above a specified threshold, while a compressor acts “softly” over a large range.

EXPANDER: Background noises of all types (noise, humming etc) limit the dynamic range of the actual signal. As long as the level of the actual signal lies significantly above the background noise, the noise is inaudible. The interference signal in this case is masked by the actual signal. The expander is used to effectively expand the dynamic range of signals. Signals with small amplitudes (such as background noise) can be weakened, thereby reducing the background noise.

GATE: On stage and in studios, there are diverse applications where a noise gate is needed. For example, microphones that tend to cause feedback can be “defused”. In addition, you can use a gate to eliminate unwanted noise. When used on vocals, for example, the signal is simply masked during pauses, thus eliminating all noise. Needless to say, a gate used on vocals has to open very quickly—otherwise, the first syllables of soft or whispered passages would not be audible.

2. EFFECTS ALGORITHMS

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents User’s Manual Detailed Safety Instructions Safety InstructionsForeword DSP2024P Table of Contents Concept IntroductionControl elements Before you get startedDisplay section of the Virtualizer PRO Virtualizer PRO DSP2024P Virtualizer PRO rear panel Effects AlgorithmsReverb algorithms Delay algorithmsModulation and Pitch Shifter effects Dynamic effects Psycho-acoustic effects Filter/EQ effects Distortion effects and amp simulations Special effects Effects algorithm combinations multi-effects programs Tab .9 Parameter functions of multi-effects programs Effects structure OperationOperation Effects structure, part Editing programs edit mode Calling up presetsStoring programs Midi control Setup modeDual engine configuration Config Level setting Restoring the factory presetsUsing the Virtualizer PRO in the aux bus ApplicationsWiring the Virtualizer PRO in the insert path Using the Virtualizer PRO in the insert pathVirtualizer PRO DSP2024P Midi Functions of the DSP2024P Using the Virtualizer PRO in a Midi setupSaving data via Midi Mains connection InstallationAudio connections Selecting the operating level Midi connectionsParameter overview AppendixVirtualizer PRO DSP2024P Midi implementation Default settings Virtualizer PRO DSP2024P Parameter range of effects algorithms Tab .8 Parameter range of effects algorithms continuation Analog Inputs Specifications§ 1 Warranty CARD/ONLINE Registration Warranty
Related manuals
Manual 4 pages 49.87 Kb

DSP2024P specifications

The Behringer DSP2024P is a versatile digital signal processor that has gained popularity among audio professionals and enthusiasts alike. This device is designed to enhance audio quality by providing a wide array of effects, allowing for greater creativity and control over sound.

At the heart of the DSP2024P lies its powerful DSP engine, which delivers high-quality processing capabilities. It features 24-bit resolution, ensuring that audio signals maintain clarity and detail through various manipulations. This processor is equipped with a wide range of effects, including reverb, delay, chorus, flanger, and even pitch shifting, allowing users to experiment with different soundscapes and textures.

One of the standout features of the DSP2024P is its User-Friendly interface. The device is designed with a clear LCD display, which presents real-time information about the selected effects and parameters. This allows users to navigate the menu efficiently and make adjustments on the fly without getting lost in complex settings. It also includes a built-in virtual patch bay, making it easy to route effects to different channels and applications.

Another key technology in the DSP2024P is its advanced dynamic processing. The device can handle complex audio signals with ease, providing users with tools like compression, expansion, and gating. This allows for precise control over dynamics and ensures that audio mixes maintain their integrity even in challenging environments.

The DSP2024P is also equipped with MIDI interfacing capabilities. This feature enables the processor to synchronize with other MIDI-compatible devices, facilitating seamless integration into live setups or studio environments. Users can recall presets remotely via MIDI, which is particularly advantageous during live performances.

Moreover, the robust build quality of the DSP2024P ensures durability and reliability, making it a suitable choice for both studio and stage applications. The rackmountable design also offers ease of integration into existing setups, allowing for a clean and organized workspace.

In summary, the Behringer DSP2024P stands out for its powerful processing capabilities, diverse effects, intuitive user interface, and solid construction. Whether used in a studio, during live performances, or for personal projects, this digital signal processor proves to be an invaluable tool for any audio professional looking to explore the possibilities of digital audio manipulation.
Top Page Image Contents