Fishman Pro-Eq manual Quick Start

Page 3

Quick Start

1.Place XLR Pre / Post switch to “post” position.

2.Adjust the Input Gain so that the Clip / Low Battery light barely flickers with strong playing.

3.For acoustic bass only: Set Phase switch to position that sounds best and suppresses feedback.

4.Set Compression and Depth to 10:00.

5.Set EQ and re-adjust Input Gain if necessary (Clip LED should barely flicker with strong playing).

Image 3

Contents User Guide Welcome Quick Start Input-Plug your bass in here Power OptionsVolt Battery Volt Phantom PowerCompression Clip / Low Battery IndicatorVolume Input GainPhase Switch DepthCompression Fighting Feedback Tone Controls Output 1/4 unbalancedXLR balanced Out XLR Post XLR Pre/Post SwitchXLR Ground Lift Tuner / SendDub/Reggae Tumbao Fretless Jazz Classic Thumb-style Sample EQ SettingsPage Stage Setups PA System XLR Cable Block Diagram Tone Controls SpecificationsPower Options Nominal Output Levels and ImpedancesRev B