Korg manual Connecting the KP3, Selecting Programs and Working with Program Memory Buttons

Page 3

KP3 EasyStart

Connecting the KP3

1.Connect the LINE OUT L, R jacks to the line input of your DJ mixer, line mixer, or connect to the FX Return of your DJ mixer if so desired.

2.Set the CONNECTION switch to either DIRECT or SEND. Only set the CONNECTION switch to SEND if you are using the KP3 in an FX Send/Return configuration.

3.Connect your line input source to the LINE IN L, R jacks or a microphone to the 1⁄4” MIC input on the front. Set the INPUT SELECT switch to the corresponding input.

4.Adjust the input level using the INPUT VOLUME knob so that the PEAK LED does not turn RED. If a microphone is being used, first adjust the MIC TRIM knob so the sound is not distorted.

Selecting Programs and Working with PROGRAM MEMORY Buttons

There are 128 effect programs in the KP3 and these include some great new effects! Eight favorite programs can be saved to the eight PROGRAM MEMORY buttons.

1.If the display is showing the current BPM, PRESS the PROGRAM/BPM knob to switch to the program display.

2.HOLD the SHIFT button and rotate the PROGRAM/BPM knob to select by category. The display will show the category and program number (Example: Flt.1 or Voc.1). When a program is selected, the TOUCH PAD will display and scroll the program name!

3.Select program “Syn.1” and rub the TOUCH PAD. Nice synth sound! You can tell that this program synchronizes to BPM by the blinking BPM indicator to the right of the display.

4.Rotate the PROGRAM/BPM knob clockwise to advance to the next program. The PROGRAM/BPM knob is continuous so when the last program is reached it will wrap around to the beginning of the list.

5.Eight favorites can be stored on the PROGRAM MEMORY button. Simply press one of these eight buttons to recall a stored program.

6.To store a program to a PROGRAM MEMORY button, press the WRITE button. The PROGRAM MEMORY and the WRITE buttons will blink. Press the PROGRAM MEMORY button to which you want to save the program. Press WRITE to exit without saving.

FOUR PROGRAMS TO TRY

drM.2 BeatBox

X AXIS changes patterns

Beat Box

Y AXIS controls delay depth

 

 

SYn.1 SawBass

X AXIS Synth pitch

Unison Saw Bass

Y AXIS HPF Cutoff & Resonance

 

 

Voc.1 Vocoder

X AXIS Pitch

Vocder

Y AXIS Vocoder tone

 

 

SMP.2 SmplRoll

X AXIS Sample Length (1/1, 1/2, 1/4….1/128)

Sample Roll

Y AXIS HPF Cutoff & Resonance

 

 

Note: See the EFFECT PROGRAM LIST included with the KP3 for a detailed program list.

3

Image 3
Contents EasyStart Quick Overview of Buttons, Knobs and Switches Selecting Programs and Working with Program Memory Buttons Connecting the KP3Sampling a Loop Sampling and ResamplingFormatting and Saving Data to a Card Saving and Loading using SD Memory CardsPAD Motion function FX Release functionKP3 Editor/Librarian Software USB Mode