BA115 BASS AMPLIFIER
TOP PANEL:
ON
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0dB |
|
|
|
| 1 2 3 4 5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
|
| INPUT |
|
| GAIN | MASTER | STYLE | TREBLE ULTRA MID | BASS | CD INPUT HEADPHONES | LINE OUT | POWER | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
1.0dB INPUT: Connect your “passive” bass guitar here using a shielded instru- ment cable. This input is not padded and is best suited for basses without active electronics or “hot” pickups.
2.
3.GAIN: Use this control in conjunction with your instrument’s volume controls to adjust the level of the signal sent to the preamp.
4.MASTER: Use this control to adjust the overall listening level of the amplifier. This control is also used to adjust the sig- nal level at the Line Out jack (#11).
5.STYLE: This
6.TREBLE: This control is used in con- junction with the style control to adjust the high frequency level of the amplifier.
7.ULTRA MID: This control is used in conjunction with the style control to adjust the midrange level of the amplifier.
8.BASS: This control is used in con- junction with the style control to adjust the low frequency level of the amplifier.
9.CD INPUT: These jacks (RCA type) are used to connect the line level (or headphones) output of a CD player or tape deck. The inputs to these jacks are summed into a mono signal which is fed into the BA115 just prior to its power amplifier. Use the volume control on the CD or tape player to control the output level.
10.HEADPHONES: The internal speak- er is disconnected when the head- phones jack is used.
11.LINE OUT: This jack supplies a post- eq, balanced line level signal for con- necting to a house sound board, record- ing unit or external amplifier. The ampli- tude of this signal is adjusted by the Master control (#4).
12.ON LED: This LED is illuminated when the amplifier is plugged in and turned on.
13.POWER: This switch is used to turn the amplifier on or off.