Daisy-chaining Mixers
When more than four microphones are needed, it is possible to
Note that one or more mixers can be switched to “Manual” mode without affecting the automatic operation of any other mixers in the chain.
NOMA information is passed between
Rack Mounting
Provided with each mixer are two rack ears and six
Security Caps
For permanent installations where microphone selections, positions and acoustic conditions are constant, it may be advantageous to remove the front panel knobs and install security caps to prevent unauthorized adjustments. To install, simply press the caps into place, covering the desired control(s). The system should be tested carefully before installing the security caps because they are intended to be “permanent” and are very difficult to remove.
If removal of installed security caps becomes necessary, unplug the mixer, remove the two screws on each side of the unit and remove the top cover. Then remove the nine screws that attach the front panel: six on top and three underneath. Remove the front panel. With the panel removed, the two locking tabs on each security cap can be accessed. The cap can be released by carefully squeezing the two tabs together.
14