Connections – Chapter 2
Mono In - Stereo Out. If you only want to feed the MicroVerb 4 a mono input, but wish to connect both of its outputs back to the mixer, you will need three 1/4" audio cables. Connect a mono cord from an effect send to the [LEFT] input of the MicroVerb 4, another mono cord from the [LEFT] output of the MicroVerb 4 to an effect return or other mixer input, and another mono cord from the [RIGHT] output of the MicroVerb 4 to an adjacent effect return or mixer input.
LEFT/MONO INPUT
INPUT | MIX | OUTPUT |
CLIP
DUAL CHANNEL PARRELL PROCESSOR
STORE
BANK
L INPUT R
MIDI
LEFT OUTPUT
RIGHT OUTPUT
AUX SEND 1
AUX RETURNS OR INPUT CHANNELS
MIXER
Stereo In - Stereo Out. This connection is similar to the one described above. However, by utilizing two sends from the mixer, we add one more cord and can now send a stereo signal to the MicroVerb 4’s inputs. For example, if you connected sends 3 and 4 to the [LEFT] and [RIGHT] inputs, and had a stereo instrument (such as a keyboard) connected to two channel inputs of the mixer (either one panned hard left and hard right), you would send the left channel to send 3 and the right channel to send 4. This is especially useful on the Dual Send Programs,
LEFT/MONO INPUT 
RIGHT INPUT
INPUT | MIX | OUTPUT |
CLIP
DUAL CHANNEL PARRELL PROCESSOR
STORE
BANK
L INPUT R
MIDI
LEFT OUTPUT
RIGHT OUTPUT
AUX SEND 1
AUX SEND 2
AUX RETURNS OR INPUT CHANNELS
MIXER
Using Inserts
MicroVerb 4 Reference Manual | 17 |