JVC KA-F5603U, KA-F5602U manual Safety Precautions for USA and Canada

Page 3

SAFETY PRECAUTIONS (FOR USA AND CANADA)

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

ATTENTION

RISQUE D’ELECTROCUTION

NE PAS OUVRIR

ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION

NE PAS OUVRIR LE BOITER.

AUCUNE PIECE INTERIEURE N’EST

A REGLER PAR L’UTILISATEUR.

SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This unit should be used with 12 V DC only.

CAUTION:

To prevent electric shocks and fire hazards, DO NOT use any other power source.

NOTE:

The rating plate (serial number plate) is on this unit.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION

CHANGES OR MODIFICATIONS NOT APPROVED BY JVC COULD VOID USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2)THIS DEVICE MUST ACCEPT ANY INTERFER- ENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Le symbole de l’éclair à l’intérieur d’un triangle équilatéral est destiné à alerter l’utilisateur sur la présence d’une “tension dangereuse” non isolée dans le boîtier du produit. Cette tension est suffisante pour provoquer l’électrocution de personnes.

Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à alerter l’utilisateur sur la présence d’opérations d’entretien importantes au sujet desquelles des renseignements se trouvent dans le manuel d’instructions.

*Ces symboles ne sont utilisés qu’aux Etats-Unis.

AVERTISSEMENT:

POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTROCUTION, NE PAS EXPOSER L’APPAREIL A

L’HUMIDITE OU A LA PLUIE.

Cet appareil ne doit être utilisé sur 12 V en courant continu.

ATTENTION:

Afin d’éviter tout resque d’incendie ou d’électrocution, ne pas utiliser d’autres sources d’alimentation électrique.

REMARQUE:

La plaque dıidentification (numéro de série) se trouve sur l’appareil.

INFORMATION (F0R CANADA) RENSEIGNEMENT (POUR CANADA)

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Class B est conforme à la norme NMB-003 du Canada.

English

3

Image 3
Contents KA-F5602U KA-F5603U S3125A Safety Precautions for USA and Canada Safety Precautions for Europe Port Cable Length Multi-system output Main FeaturesEquipped with analog 26P camera connector Model SDI Output Terminal KA-F5602U Nil KA-F5603U YesContents  Studio Kit main body AccessoriesGetting Started Related Products used in Conjunction with this Unit When Gain-lock signal is input into KY F560 PrecautionsRegarding Gain-lock Signal and adjustment of System Phase  When Gain-lock signal is input into RM- P210Intercom Intercom Input Terminal XLR 5 Pin Incom Level Intercom Receiver VolumeIncom MIC Intercom Mic ON/OFF Switch Part Names and FunctionsCamera Mounting Frame Relay Board Incom MIC Intercom Mic CARBON/ Dynamic SwitchCall Indicator Call Call ButtonScrew Holes for Mounting Tripod DC Input DC Power Input Terminal XLR 4 PinBreaker Breaker Switch $ Prompter Output Prompter Output Terminal BNCSystem InstallationMounting KY-F560 Camera on this Unit Installation ProceduresScrew ı Slot Relay board Lever Mounting this Unit onto the Tripod Mounting the Lens onto the CameraMounting VF-P400 4-inch Viewfinder on this Unit Connection Pin camera cable Connecting RM-P210Connecting to Remote Control Unit RM-P210 Setting  Menu screen settingOperation  Switch settingVolume This unitConnecting RM-P210 Settings in bold are factory settings Menu ScreenSystem Menu Screen Display Menu Screen Menu ScreenSpecifications Dimensions Unit mmOthers Memo スタジオキット スタジオSDIキット 主な特長 お買い上げいただきありがとうございます。メニュー画面 本機を使用するための関連商品 付属品をご確認くださいゲンロック信号およびシステム位相調整について 正しくお使いいただくためのご注意各部の名称と働き はじめに各部の名称と働き(つづき) DC INPUTDC電源入力端子(XLR4ピン ビデオ機器 システム本機にKY-F560カメラを取り付ける 取り付けの手順本機にKY-F560カメラを取り付ける(つづき) 本機を三脚に取り付ける カメラにレンズを取り付ける本機に4型ビューファインダーVF-P400を取り付ける リモートコントロールユニットRM-P210を接続する RM-P210接続本機背面 リモートコントロールユニットRM-P210を接続する(つづき)RM-P210接続 メニュー画面 メニュー画面 保証とアフターサービス その他その他 Japanese 2 0 2 8 2 8 1 KA-F5602U/KA-F5603U
Related manuals
Manual 47 pages 23.93 Kb

KA-F5603U, KA-F5602U specifications

The JVC KA-F5602U and KA-F5603U are powerful frame synchronizers and converters that cater to the professional broadcast and production industries. With their advanced features and superior technologies, these models are designed to enhance video processing capabilities, making them essential tools for high-quality video production.

One of the main features of the JVC KA-F5602U is its ability to handle a wide range of video formats. This model supports a variety of input signals, including HD-SDI, SD-SDI, and composite signals, enabling seamless integration into any broadcasting setup. The KA-F5603U further expands on this capability with additional support for 3G-SDI inputs, ensuring compatibility with even higher resolution formats.

Both models come equipped with real-time frame synchronization technology, which is crucial for ensuring that video signals are perfectly aligned, minimizing any lag or drift. This feature is especially important for live broadcasts or multi-camera setups where precision timing is necessary. The synchronization ensures that video and audio remain in perfect sync, even when switching between different sources.

Another significant characteristic of the KA-F5602U and KA-F5603U is their advanced up/down/cross conversion capabilities. This allows users to convert video signals between different formats without compromising on quality. Whether switching from 1080p to 720p or from standard definition to high definition, these models maintain the integrity of the original content.

Furthermore, both devices include various processing features such as frame rate conversion, which can adjust the frame rate of incoming signals to match the desired output. This is particularly valuable in mixed-format environments where compatibility across various systems is essential. The user-friendly interface provides easy access to these extensive processing options, making operation straightforward for any professional, regardless of their technical expertise.

In terms of connectivity, the KA-F5602U and KA-F5603U are designed to integrate seamlessly with other broadcast equipment. They feature multiple output options, including HD-SDI, as well as embedded audio support, which allows for enhanced audio integration. Reliable performance, robust build quality, and user-oriented features make these models stand out in the crowded field of video processing equipment, ensuring that they meet the demanding needs of today’s broadcasters and content creators.