Cisco Systems 0L-1570-01 Required Tools and Equipment, Stabilizing the System, Lifting the System

Page 10

Chapter 2 Preparing for Installation

Required Tools and Equipment

•Avoid placing the system in an overly congested rack or directly next to another equipment rack. Heat exhaust from other equipment can enter the inlet air vents and cause an overtemperature condition.

•Equipment near the bottom of a rack might generate excessive heat that is drawn upward and into the intake ports of the equipment above. The warm air can cause an overtemperature condition in the equipment above.

•Ensure that cables from other equipment do not obstruct the airflow through the chassis or impair access to the power supplies or cards. Route cables away from field-replaceable components to avoid disconnecting cables unnecessarily for equipment maintenance or upgrades.

Stabilizing the System

Follow these guidelines to stabilize the equipment rack:

•Install any stabilizers that came with your equipment rack before mounting or servicing the system in the rack.

•Load the rack from the bottom to the top, with the heaviest system at the bottom.

•Do not stack the system on top of any other equipment. If the system falls, it can cause severe bodily injury and damage the equipment.

•If you are using an equipment shelf, ensure that the shelf is constructed to support the weight and dimensions of the chassis.

•If you are using a telco rack, ensure that the weight of the chassis does not make the rack unstable. Secure the telco rack with ceiling brackets if the rack is populated with heavy equipment.

•Bolt the rack to the floor for stability.

Lifting the System

Follow these guidelines when lifting the system:

•Disconnect all power and external cables before lifting the system.

•Ensure that your footing is solid and the weight of the system is evenly distributed between your feet.

•Lift the system slowly, keeping your back straight. Lift with your legs, not with your back. Bend at the knees, not at the waist.

Required Tools and Equipment

You need the following tools and equipment to install the system:

•The provided accessory kit, which includes:

–Rack-mount kit

–Console cable

–Power cord

•Antistatic mat or antistatic foam

•ESD grounding strap

Cisco Intelligence Engine 2100 Series Configuration Registrar Manual

2-10

OL-1570-01

 

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Preparing for Installation SafetyOL-1570-01 Working with Electricity Preventing EMI Preparing Your Site for InstallationPreventing Damage from Electrostatic Discharge Covering Empty SlotsChoosing a Site For Installation Grounding the System Creating a Safe EnvironmentCabling AC PowerEthernet Standards RJ-45 Pin Signal Direction Console Cable and Adapter Rollover CableRack-Mounting the System Ensuring Proper AirflowStabilizing the System Required Tools and EquipmentLifting the System Accessory Kit Quantity Part Description ReceivedOL-1570-01

IE2100, 0L-1570-01 specifications

Cisco Systems has consistently been at the forefront of networking technology, and the 0L-1570-01, IE2100 stands as a testament to their commitment to innovation in industrial networking solutions. This device is part of Cisco's Industrial Ethernet switches, designed to meet the increasing demand for robust network connectivity in harsh and rugged environments, where reliability and performance are paramount.

One of the standout features of the IE2100 is its rugged design. It is built to withstand extreme temperatures, shocks, and vibrations, making it ideal for deployment in manufacturing plants, oil and gas facilities, and transportation systems. The IE2100 has been tested to meet rigorous industrial standards, ensuring that it can operate reliably in challenging conditions.

Performance is another key highlight of the IE2100. It supports advanced Ethernet technologies, including Gigabit Ethernet ports and Power over Ethernet (PoE) capabilities, allowing for flexible connectivity of various devices, such as IP cameras, sensors, and industrial controllers. This flexibility enables organizations to streamline their operations and enhance the efficiency of their networks.

In terms of scalability, the IE2100 offers a modular design that allows businesses to expand their networking capabilities to meet evolving demands. With support for various configurations, organizations can tailor the switch to their specific needs, whether that involves increasing the number of ports or integrating additional features as their operations grow.

Security is paramount in any networking environment, and Cisco has incorporated robust security features into the IE2100. It provides advanced security protocols, ensuring that data remains protected from potential cyber threats. This is critical in industrial settings where sensitive information and operations are frequently targeted by malicious actors.

Moreover, the IE2100 is equipped with intelligent networking capabilities, including Cisco’s DNA (Digital Network Architecture) which provides enhanced visibility, analytics, and automation. This enables organizations to monitor their network performance in real-time, facilitating quicker response times to any potential issues.

In summary, the Cisco 0L-1570-01, IE2100 is a highly capable industrial Ethernet switch designed to provide reliable, high-performance networking in demanding environments. With its rugged design, advanced security features, scalability, and intelligent networking capabilities, the IE2100 is ideally suited for industries that require resilient and secure connectivity. Its ability to facilitate seamless integration of IoT devices further positions it as a vital component in the evolution of industrial automation and smart manufacturing.
Top Page Image Contents