Advanced Amplification for V-Drums

The PM-30 is a 2.1-channel advanced speaker system. With 200 watts of Class-D power, a high-performance 12" woofer with tweeter, a pair of 4" satellite speakers, and a proprietary DSP engine, the PM-30 delivers powerful, full-range sound in a convenient and portable package. The selectable Full-Range and Subwoofer modes let you customize low-frequency performance, while the built-in 3-band EQ lets you fine-tune the tone. A solid crossbar spans the top of the base unit for convenient carrying. The satellite speakers can be clamped onto the crossbar or mounted onto a drum rack.

SPECIFICATIONS

•Rated Power Output 200 W (Main Unit 100 W + Satellite Speaker 50 W x 2) • Nominal Input Level (1 kHz) INPUT Channel 1 (V-DRUMS): -10 thru +4 dBu, (LINE IN): -20 thru +4 dBu, Channel 2 (LINE IN): -10 thru +4 dBu, Channel 3 (LINE IN): -10 thru +4 dBu • Nominal Output Level LINE OUT: +4 dBu, SPEAKER OUT: 50 W/4 ohms • Speakers Main Unit: 30 cm (12 inches) x 1 (Woofer), 7.7 cm (3 inches) x 1 (Tweeter), Satellite Speaker: 10 cm (4 inches) x 2 (Full Range) • Controls <V-DRUMS/Channel1> PUNCH Switch, Volume Knob <Channel2 > VOLUME Knob <Channel3> VOLUME Knob <Woofer Control> Mode Select Switch, Volume Knob <MASTER> BASS Knob (Equalizer), MIDDLE knob (Equalizer), TREBLE knob (Equalizer), VOLUME Knob, POWER Switch • Indicator POWER • Connectors Main Unit: <V-DRUMS/Channel1> V-DRUMS INPUT Jack (stereo 1/4” phone type), LINE IN Jack (1/4” phone type) <Channel2 > LINE IN Jack (1/4” phone type) <Channel3> LINE IN Jack (1/4” phone type / RCA PIN type), LINE OUT Jack (1/4” phone type), SPEAKER OUT Jack (1/4” phone type), PHONES

Jack (stereo 1/4” phone type), Satellite Speaker: INPUT Jack (1/4” phone type) • Power Supply AC 117 V, AC 230 V, AC 240 V (50/60 Hz), AC 220 V (60 Hz) • Power Consumption 63 W

•Dimensions Main Unit: 451 (W) x 482 (D) x 482 (H) mm/ 17-13/16 (W) x 19 (D) x 19 (H) inches (Excluding casters), 451 (W) x 482 (D) x 533 (H) mm/ 17-13/16 (W) x 19 (D) x 21 (H) inches (Including casters), Satellite Speaker: 152 (W) x 158 (D) x 209 (H) mm/ 6 (W) x 6-1/4 (D) x 8-1/4 (H) inches • Weight Main Unit: 24.3kg / 53 lbs 10 oz (Excluding casters), 25.0 kg / 55 lbs 2 oz (Including casters), Satellite Speaker: 2.2 kg / 4 lbs 14 oz (for each) • Accessories Mount Bar x 2, Clamp x 2, Speaker Cable (3.5 m) x 2, Caster x 4, Owner's Manual * 0 dBu = 0.775 Vrms

Solid, Portable Sound Reinforcement

Designed as a portable companion for Roland’s V-Drums, the PM-10 is equipped with a 30-watt amplifier and a 10" 2-way coaxial speaker. Its compact design is perfect for small-sized drum kits, such as the TD-3KW, and the TD-9KX/TD-9K. Jam along with your favorite songs by connecting an external CD or MP3 player to the Line In jack. Balance the V-Drums and the external audio with the dedicated

Prevent your drum components from slipping while simultaneously safeguarding your floor from scratches and reducing impact noise/vibration. Roland’s TDM-10 and TDM-20 heavy-duty drum mat is adorned with the Roland V-Drums logo. The mat is available in medium and large sizes.

SPECIFICATIONS

(TDM-20) • Dimensions 1,600 (W) x 1,500 (D) x 8 (H) mm/ 63 (W) x 59-1/16 (D) x 0-3/8 (H) inches • Weight 3.0 kg/ 6 lbs. 10 oz.

(TDM-10) • Dimensions 1,200 (W) x 1,300 (D) x 8 (H) mm/ 47-1/4 (W) x 51-3/16 (D) x 0-3/8 (H) inches • Weight 2.1 kg/ 4 lbs. 11 oz.

Floor shock Noise Test (JIS* A1418)

TDM-20TDM-10

*JIS: Japanese Industrial Standards

Essential Accessories for V-Drummers

This handy drum accessory package is ideal for entry-level V-Drums owners, allowing them to start playing their V-Drums right out of the box.

volume controls; adjust the tone with the built-in 2-band EQ.

SPECIFICATIONS

•Rated Power Output 30W • Nominal Input Level/Input Impedance V-DRUMS Input: 0dBu/20k ohms, LINE Input 0dBu/20k ohms • Speakers 10" (250 mm) Woofer + 3" (77 mm) Tweeter (Coaxial, 2-way)

•Enclosure Bass-reflex type • Controls V-DRUMS Volume Knob, LINE Volume Knob, BASS Knob, TREBLE Knob, POWER SW • Indicator POWER • Connectors V-DRUMS Input Jack (Stereo 1/4" phone type) LINE Input Jack (Stereo 1/4" phone type) • Power Supply AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)

•Power Consumption 36W • Dimensions 364 (W) x 396 (D) x 352 (H) mm 14-3/8 (W) x 15-5/8 (D) x 13-7/8 (H) inches • Weight 12 kg / 26 lbs 8 oz • Accessories Owner's Manual Power Cord * 0 dBu = 0.775 Vrms

DAP-3

Components

•Kick Pedal

•Drum Throne

•Drum Sticks

DAP-1

Components

•Drum Throne

•Drum Sticks

•Audio Cable

Mini plug, Cable length: 375 mm / 14-13/16"

• In-ear headphones

High-quality headphones faithfully reproduce the powerful, dynamic sound of V-Drums.

OPTIONS

Stereo Headphones RH-300

Roland’s top-of-the-line headphones for the ultimate in sound quality, appearance, and performance. The 45mm (1-13/16”) drivers and neodymium magnets deliver dynamic, full-range performance. The snug fit shuts out external sound.

Stereo Headphones RH-D30

Optimized for high-impact onstage performance, RH-D30 headphones are light and comfortable with superior isolation, powerful and clear sound, and a super-wide frequency range. Other features include high-capacity 45mm (1-13/16") drivers and 180-degree rotating earpieces (90-degrees transverse). Carrying pouch included.

Stereo HeadphonesRH-200 /RH-200S

With 40mm (1-5/8”) drivers, the RH-200/RH-200S headphones
offer the clarity, sonic accuracy, and comfort needed for mixing
and silent practice. They also feature a gold-plated 1/8-inch
stereo connector with 1/4” adapter.	RH-200	RH-200S

Stereo HeadphonesRH-D20

Similar in design to the RH-D30, the RH-D20 has 40mm (1-5/8") drivers. Lightweight and comfortable for extended wearing, the RH-D20 provides superior sound isolation, balanced sound across the frequency spectrum, and 180-degree rotating earpieces for single-ear monitoring (90-degrees transverse). Carrying pouch included.

Pad Stand PDS-10

Height: 643 - 1,093mm / 25-3/8 inches

Weight: 3.8kg / 8 lbs 7 oz

Adjustable clamp for optimal playing position. Tilt: 200 ˚

All Purpose Clamp APC-33

This clamp can be used to attach an SPD-series percussion pad to a conventional cymbal stand for use with a V-Drums or acoustic drum kit.

Mounting Plate MDP-7

The MDP-7 is the mounting plate for TD-series sound modules such as the TD-3, TD-12, and TD-20 when customers want to attach the sound module to the new MDS-9.

Pedal Switch DP-2FootSwitch FS-5U /FS-6

Connection Cable PCS-31L

Using the PCS-31L, you can connect two single-trigger pads to a particular stereo trigger input* on a TD-Series module — a great way to get more pads in your system.

*Please refer to (*6) of p. 38.

AC Adaptor PSA-120S

The new and improved PSA-120S power adaptor features increased output of 500mA, extended length of 3m (118-1/8”), lighter weight at 140g (5 oz), and

Open-Air Headphones RH-A30		Roland Inner Ear HeadphonesRH-iE3
Roland’s new open-air-type headphones are made for musicians who		These attractive in-ear headphones feature aluminum housings,
don’t want total isolation from surrounding sounds. For maximum		gold-plated plugs, and advanced drivers for a balanced, full-range
comfort during extended sessions, the RH-A30’s ear pads have been		sound with deeper bass and extended frequency performance.
newly designed.		Longer shaft arms ensure easy mounting and detaching.

Cymbal Parts Set CYM-10

This package includes three essential components; Stopper, Felt Washer, and Wing Nut. Compatible products include all Roland CY series Cymbals.

FS-5UFS-6

These rugged footswitches can be used for changing patches, start/stop, tempo, or other parameters. They can be used with the TD-20/10/8, SPD-series, and HandSonic.

a body that’s extra slim. It’s also equipped with a power indicator.

2 8

2 9