ESX1 EasyStart
6.To listen to your sample, press the SAMPLE mode key and play any of the DRUM PART keys or press the PLAY/PAUSE ( / ) key.
7.To save/write your sample into memory, press the WRITE key, select the sample destination number and then press the WRITE key again. To name or rename the sample, press and hold the SHIFT key and then press the WRITE key, then use
the | keys and the VALUE dial to change the characters on the screen. |
Editing a Sample
1.Press the SAMPLE mode key to enter SAMPLE mode.
2.Select the sample you wish to edit using the VALUE dial.
3. Use the keys and the VALUE dial to select and edit the SAMPLE START, END, LOOP START, SAMPLE TUNE and STRETCH STEP parameters. To execute the NORMALIZE, TRUNCATE, TIME SLICE or DELETE SAMPLE functions, press and hold the SHIFT key and then press the corresponding STEP key
4.To save/write your sample into memory, press the WRITE key, select the sample destination number and then press the WRITE key again. If you do not write the sample into memory the edits you have made will not be saved.
5. To name or rename the sample, press and hold the SHIFT key and then press the WRITE key, then use the | keys and |
the VALUE dial to change the characters on the screen. |
|
Global Mode
1.Press the GLOBAL mode key to enter the GLOBAL mode.
2. Use the | keys and the VALUE dial to select pages and adjust parameters in the GLOBAL mode. |
3.To save any GLOBAL mode settings, press the WRITE key twice.
4.To access the MIDI UTILITY or CARD functions, press and hold the SHIFT key and then press STEP key 15 or 16. Then the VALUE dial to select different pages.
Loading or Saving Data with a SmartMedia Card
1.Press the GLOBAL mode key to enter GLOBAL mode, then press and hold the SHIFT key and press STEP key 16.
2.Use the VALUE dial to select either CardMenu Load, Save, Format or Delete.
3.To execute a Load, Save, Format or Delete, press the flashing STEP key 16.
6