Fiesta ESD45055-B401 manual Enlarged View, Burner Installed, Jumper Wire, De puente largo

Page 6

BURNER AND IGNITER

HORNILLA Y ENCENDEDOR

Install H Burner as Shown. Instalar hornilla de la H según lo mostrado.

Note: Feed the two ignition wires from the burner through the front hole of the casting.

Nota: Alimente los dos alambres de la ignición de la hornilla a través del agujero delantero del bastidor.

"H" Burner

Hornilla De "H"

Note: Be Sure Valves Fit into Burner Tubes During Console Installation.

Nota: Este seguro que las válvulas encaje bien durante la instalación de la consola.

				Enlarged View of
				Enlarged View of
Attach long (10")				Burner Installed.
Jumper Wire.				Vista agrandada de
Una (10") el alambre				la hornilla instalada.
de puente largo.

6

Image 6

Contents Outdoor Gas Barbeque / Grill Wheels and LEG Extensions StartComienzo Ruedas Y Extensiones DE LA PiernaCarriage Bolt Install Cross Member as ShownChannel Clamp Installed Cup WasherFront Panel and Back Support Panel Delantero Y Ayuda TraseraConsole and Base Base Y ConsolaBurner Burner InstalledJumper Wire Enlarged ViewShelf and Flame Trap Trampa DEL Estante Y DE LlamaSide Burner Assembly Install Side Burner Base Assembly and Valve AttachmentTo the rear of the console. Nota Side Burner and LID Assembly Install Side BurnerIgnitor Installation Tank Installation DeParts/PiezasReplacementRecambio Replacement Parts/Piezas De Recambio