ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
B |
| STEP 5. | |
13 | 1 | Note: Do not over tighten. Damper should | |
move freely. | |||
| |||
|
| Attach air damper (13) to kettle lid (1) using | |
|
| phillips head screw (B) and hex lock nut (C). |
C
6 
5
H
F
D
STEP 7.
Place heat insulations washers (H) on ash can handle as shown. Insert handle (6) into ash can
(5)and secure using aluminum flat washers (F) and hex nuts (D).
10
H
12 
STEP 6.
Place heat insulation washers (H) on lid handle (10) as shown. Insert screws on lid handle (10) into holes in kettle lid (1). Add lid hook (12) then aluminum flat washers (F) and secure with hex nuts (D).
18
1
15
16
2
STEP 8.
Insert lighting grate (18) into assembled ash can (5) as shown below.
Slide assembled ash can (5) onto guides of ash can spacer ring (7).
Place charcoal grate (16) inside kettle base (2).
Rest cooking grate (15) on kettle base (2) as shown.
Place kettle lid (1) onto kettle base (2).
1
F
D
5
7
GRILL IS READY FOR USE
7 | 8 |
|