2
5
C
B
STEP 3.
Note: Do not over tighten. Damper should move freely.
Attach air damper (5) to kettle base (2) using phillips head screw (B) and nylon hex lock nut (C) as shown.
STEP 5.
Slide ash can (3) onto rails on bottom of kettle base as shown.
3
Rail | Rail |
6 | STEP 4a. |
|
Place heat insulation washers (G) on lid handle (6) as shown. Insert handle screws into holes in kettle lid. Add aluminum flat washers (E) and secure with serrated flange nuts (D).
G
STEP 4b.
Note: Do not over tighten. Damper should move freely.
| E |
| Attach lid air damper (5) to kettle lid using |
|
| phillips head screw (B) and hex lock nut (C). | |
5 |
| D | |
|
|
C
B
STEP 6.
Place charcoal grate (9) and cooking grate (8) in kettle base as shown.
8
9
GRILL IS READY FOR USE.
5 | 6 |