Thermos 4611118 manual Propane Cylinder not included

Page 11

Assembly (Con’t.)

5

-Before assembly, inspect Regulator (J) for damage, dirt or debris accumulation. Clean out if present.

-With knob pointing down, insert Regulator/Valve (J) into end of Burner (F).

Notch in Regulator/Valve (J) MUST engage dimple in end of Burner (F).

-Once Regulator/Valve (J) has completely engaged Burner (F), turn Regulator/Valve (J) clockwise to lock in position with knob pointing up.

Rotate clockwise to lock

Regulator/Valve (J)

Regulator/Valve (J)

Locked in position

6

-Remove cap from end of Propane cylinder (sold separately). Cap should be kept on cylinder when not in use to prevent dirt and debris from entering Regulator/Valve (J). Check end of cylinder attachment for dirt and debris. Clean out if necessary.

-Insert threaded end of Propane Cylinder into Regulator/Valve (J) and hand-tighten. DO NOT USE TOOLS! Over tightening can damage threads on Regulator/Valve (J).

-Perform a leak test.

Propane Cylinder (not included)

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Product Guide Model Estimated assembly time 30 minutesWash your hands after handling this product Apartment Dwellers Safety TipsFor Safe Use of Your Grill and to Avoid Serious Injury Propane Cylinder Use 1 lb. Disposable Propane Cylinder Installation/RemovalLeak Testing 1 lb. Disposable Important LP Liquefied Petroleum GasBurner Flame Check Lighting InstructionsTurning Grill Off Grill MaintenanceFood Safety Before Cooking For The First TimeLimited Warranty Hardware is shown actual size Tools required for assemblyAssembly Assembly Con’t Propane Cylinder not included Problem Possible Cause Prevention/Solution is turned on Page Page Page Box Columbus, GA
Top Page Image Contents