Contents, Introduction, General Safety Information

Contents
Contents	1
Introduction	1
General Safety Information	1
Assemble Grill	1
Instructions for Use	2
Charcoal Ash Cleaning	2
Grilling Tips and Hints	3
Cooking Methods	3
Care, Maintenance and Cleaning	3
Moving and Storage	3
Replacement Parts List — 9956 Series	6
Warranty	7
Introduction

Follow these instructions for assembly and read carefully, particularly the safety statements. The safety alert symbol, is a universally recognized symbol used to identify safety information about hazards that can result in personal injury. When this symbol is used you should pay very close attention to what is written. Review these instructions before beginning assembly or using your grill.

General Safety Information

DANGER

FOLLOW INSTRUCTIONS AND WARNINGS TO AVOID FIRE, SERIOUS INJURY OR DEATH.

•Outdoor use only. Never use in enclosed area. Use in unventilated areas can cause death.

•Keep away from all combustible materials including gasoline and other flammable liquids and vapors.

•Read & follow all warnings on charcoal package.

•Use on a level, noncombustible surface only. Keep away from house, garage, balconies, or eave overhangs.

•Keep out of the reach of children.

•Exercise the same care you would with an open fire.

•Never leave unit unattended when hot or in use.

•Completely extinguish fire before leaving.

•Use gloves when handling or moving. Ashes can remain warm for a long time after extinguishing.

•Dispose of cold ashes properly.

•Do not modify in any way or use with parts not expressly approved by Coleman.

Contact local authorities regarding possible burn restrictions before using product.

WARNING

BURN HAZARD

•Unit is hot when being used. Use care when servicing.

•Keep out of reach of children.

WARNING

Combustion by-products produced when using this product contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Assemble Grill

For use only with charcoal.

IMPORTANT: Remove all packing material prior to assembly/use.

Assemble Wheels and Towing Handle

■■ Remove grill, wheels, legs and handle from packaging. ■■ Inspect all packing and remove all parts.

■■ See carton for parts included with your unit.

■■ Assemble wheels to grill base. Attach each wheel to axle using one bolt and one washer. (Fig. 1 and Fig. 2)

Fig. 1

Fig. 2

NOTE: Wrench not provided.

■■ Telescope the extending tubes to the towing handle. Press buttons on towing handle and push in until they lock into place. (Fig. 3)

Fig. 3

■■ Cap the ends of the extending tubes with provided bushings.

(Fig. 4)

Fig. 4

■■ Interlock the towing handle and the grill stand with pivot bolts, spacers and nuts. (Fig. 5)

Fig. 5

■■ Attach ends of towing handle to grill with pivot bolts & nuts. (Fig. 6)

Fig. 6

English - 1