Assembly

1. Carefully unpack all parts from shipping box.

2. Insert Telescoping Legs into Receptors with spring clips inside legs.

Important: Orient legs so small tube welded to leg faces inward. This will ensure proper fit of the Wire Brace. Legs extend by pushing in on both spring clips protruding from the legs and pulling the legs outward.

Then lock leg in place by aligning spring clips with holes in legs. Always be sure spring clip is protruding through holes in legs to ensure stability.

Telescoping Leg

Small tubes

must face inward

Spring Clip

Receptor

3. Assemble Wire Brace to all 3 legs by inserting ends into the small tube welded to each leg. If wire brace does not fit, check Step 2 above to be sure small tube is facing inward.

Wire

Brace

Small

Tube