OPERATING INSTRUCTIONS
The AX 144 operates on 40 AM channels, 40 Upper Side Band channels and 40 Lower Side Band channels.
When you receive the SSB signal in the proper mode, audio sound may be either too high pitched or Iow pitched, indicating that your receiver may not be tuned to the exact same frequency as the transmitter to which it is listening. The AX 144 is equipped with a Clarifier. By tuning the Clarifier, you can slightly change the frequency of the receiver, so you get a normal tone.
Mlr IRF GAIN CONTROL | DIGITAL | LED |
| CH9 | INDICATOR | |
I. | CLARIFIER | CHANNEL INDICATOR |
| TWO COLOR | ||
I | RF POWER/"S" | METER | I | I | INDICATOR, | |
uniden
VOLUME/SQUELCH | NB/ANL | I | CHANNE~ SELECTOR SWITCH |
CONTROL | SWITCH | CH9/0FF | SWITCH |
I | I | I |
|
PA CAPABILITY | DIMMER CONTROL | ||
| I |
|
|
MODE SELECTOR
OPERATING CONTROLS
Your AX 144, designed for ease of operation, is provided with the following operating controls:
1.OFF/ON VOLUME: To turn the transceiver on, rotate the control clockwise
past click. To turn the transceiver off, rotate the control counterclockwise past click. Rotate the control clockwise for a comfortable audio volume level.
2.CHANNEL SELECTOR: This switch is used to select anyone of the 40 Citizens Band channels. Channel 9 has been reserved by the D.O.C. for emergency communications involving the immediate safety of life of individuals or immediate protection of property. Channel 9 may also be used to render assistance to a motorist.
3.MODE SELECTOR: This switch selects AM, USB or LSB mode of operation. This selector changes the mode of operation of both transmitter and receiver simultaneously.
Set the selector to the mode on which you wish to communicate. For easier identification of the mode, LED mode indicator is provided in three different colors, green for AM, yellow for USB, and red for LSB.