Char-Broil 461111811 manual Propane Cylinder not included

Page 11

Assembly (Con’t.)

5

-Before assembly, inspect Regulator (J) for damage, dirt or debris accumulation. Clean out if present.

-With knob pointing down, insert Regulator/Valve (J) into end of Burner (F).

Notch in Regulator/Valve (J) MUST engage dimple in end of Burner (F).

-Once Regulator/Valve (J) has completely engaged Burner (F), turn Regulator/Valve (J) clockwise to lock in position with knob pointing up.

Rotate clockwise to lock

Regulator/Valve (J)

Regulator/Valve (J)

Locked in position

6

-Remove cap from end of Propane cylinder (sold separately). Cap should be kept on cylinder when not in use to prevent dirt and debris from entering Regulator/Valve (J). Check end of cylinder attachment for dirt and debris. Clean out if necessary.

-Insert threaded end of Propane Cylinder into Regulator/Valve (J) and hand-tighten. DO NOT USE TOOLS! Over tightening can damage threads on Regulator/Valve (J).

-Perform a leak test.

Propane Cylinder (not included)

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Date Purchased Estimated assembly time 30 minutesThis Grill is for Outdoor USE only Table of ContentsFor Safe Use of Your Grill and to Avoid Serious Injury Safety TipsInstallation Safety Precautions USE and CarePropane Cylinder Use 1 lb. Disposable Propane Cylinder Installation/RemovalLeak Testing 1 lb. Disposable Important LP Liquefied Petroleum GasImportant! Remove or raise lid to open position Lighting InstructionsBurner Flame Check Turning Grill Off Grill MaintenanceFood Safety Before Cooking For The First TimeItems Manufacturer will not PAY for Limited WarrantyHardware is shown actual size Parts ListTools required for assembly HardwareGloves if necessary AssemblyAssembly Con’t Propane Cylinder not included Problem Possible Cause Prevention/Solution is turned on
Top Page Image Contents