Char-Broil 11301672 manual Lid Assembly 20x1 5/8 Screws Firebox Rear Panel

Page 13

11 Remove Cap Nut, Spring and Damper from Smoke Stack Body. Insert Smoke Stack Body through hole in Lid. Attach Smoke Stack Body to Lid using (2) 1/4-20x1/2”Screws and (2) 1/4-20Flange Nuts. Reinstall Damper, Spring and Lock Nut to Smoke Stack Body.

Cap Nut	1/4-20x1/2” Screws
Spring
Damper	Smoke Stack Body

Smoke Stack Body

1/4-20 Flange Nuts

Lid

Place Lid Assembly onto Firebox Assembly while aligning holes in Hinge Assemblies with holes in Firebox Rear

12Panel. Attach (2) Hinges Assemblies to the rear of the Firebox Assembly using (4) 1/4-20x1 5/8” Screws.

Lid Assembly

1/4-20x1 5/8” Screws

1/4-20x1 5/8”

Screws

Firebox Rear Panel

Page 13

Image 13

Contents This Unit is HEAVY! do not attempt to Tools needed for assemblyWash your hands after handling this product Table of ContentsFirst Time Use MaintenanceSeasoning To Prevent RustingBuilding Your Fire Cooking TipsVegetables Mesquite Direct and Indirect GrillingItems Manufacturer will not PAY for Limited WarrantyKey Qty Description Parts ListAssembly Attach Bottom Shelf to Legs using 4 1/4-20x2 3/8 Screws Front of Firebox Handle 20x1/2 Screw Firebox Lock Washer Flat Washer 20x1/2 Screws Lid Assembly 20x1 5/8 Screws Firebox Rear Panel 20x5/8 Shoulder Screw Side Shelf 20x5/8 Shoulder Screw Lid omitted for clarity Firebox omitted for clarity19attach using Wingnut previously removed. Tighten securely Hardware List Warranty Registration Department Box Columbus, GA