Assembly

First, get a helper, this unit is heavy and will require a second person for lifting and moving. Open the carton and lay

1 it flat. This will give you a protective surface during assembly.

Assemble firebox side panels to the outside of the firebox back panel using ¼- 20 x ¾” screws and ¼” flange nuts. Make sure to use the top hole and the third hole counting from top down.

Firebox side panel

Firebox back panel 1/4- 20 x 3/4” screws

(4 pieces)

1/4” Flange nuts (4 pieces)

2	Assemble firebox front panel to firebox side panels using ¼-20 x 3/4 screws and ¼” flange nuts, as shown, tighten
	all screws. Again make sure to use the top and third hole down.

1/4- 20 x 3/4” screws

(4 pieces)

	1/4” Flange nuts	Firebox front panel
	(4 pieces)	Firebox front panel
	(4 pieces)

Page 8