PRODUCT ASSEMBLY
Carefully remove all components from the carton. Check your parts against the parts list on page 2.
First, attach the Legs to the Fire Bowl Ring by aligning the holes in each Leg with the holes in the ring bracket. Insert a Pivot Pin through the bracket and leg, then secure the pin in place with a Hairpin Clip.
Hair Pin Clip
Fire Bowl | Pivot Pin |
Ring
Ring
Bracket
Leg
Hole
Leg
Be sure that all Legs are folded out and placed into the locked open position. To do so, pull the Locking Pin outward while rotating the Leg into position, then let go of the Locking Pin so that it engages the hole in the Ring Bracket.
All legs shown in locked open position.
1. Pull Locking Pin.
2.Rotate
leg outward
Page 3