Char-Broil 10201595 manual Hitch Pin, Wheel, Legs with holes Axle, Firebox

Page 9

3

Hitch Pin

• Slide axle into holes at ends of legs (legs	Hitch Pin
without end caps).	Wheel
• Attach wheels onto axle rod using hitch	Axle	Wheel
pins. Hitch pins insert through hole in axle
as shown in box A.

Check to be sure that all screws and nuts used so far are fully tightened.

Legs with holes

Axle

Hitch Pin

4

Figure B

•Pre-assemble the Firebox Lid and the Firebox Bottom using eight #6-32 X 3/8 Screws as shown in figure A.

•Place the firebox onto the smoker chamber and align the large openings.

•Insert eight #10-24 X 1/2” screws through the smoker chamber, into the firebox. Secure with eight #10-24flange nuts as shown in figure B.

Fully tighten all screws and nuts.

Firebox Lid	Figure A
Eight
#6-32 X 3/8
Screws

Firebox

	Eight
	#10-24
Smoker	Flange
Smoker	Nut

Chamber

Eight

#10-24 X 1/2

Screws

Firebox Bottom

Page 9

Image 9

Contents American Gourmet Wash your hands after handling this product Table of ContentsVegetables Mesquite Usda RecommendedBuilding Your Fire Cooking TipsGrill Maintenance Items Manufacturer will not PAY for Limited WarrantyKey Parts ListDescription Key DescriptionLeg Brace Supports AssemblyWheel Hitch PinAxle Legs with holes AxleFully tighten all screws and nuts Place unit in upright positionPlace fiber washers on handle rods Firebox Fire Grate Smoker Chamber Firebox Cook Grate Smoker Chamber Cook Grates Hardware not shown actual size Hardware ListPage Warranty Registration Department Box Columbus, GA