GE Monogram ZGG36L21CSS Installation in a non-combustible enclosure, Clearances All Models

ZGG36L21CSS – GE Monogram 36" Outdoor Cooking Center

Dimensions and Specifications (in inches)

		(6.5 AMP Min.)
3" Min. for Lid	40-1/2"	23-3/4"
Clearance
		35-1/2"
	18-1/2"	3-1/8"
10-1/8"		4x4 Opening
	18-1/4"	for Gas Supply
		Line
	24-1/8"	Opening
		for Access
		Doors

Installation in a combustible enclosure

ZX36JYSS insulated jacket is required.

•The insulated jacket must be supported from the bottom by a solid deck or ledge on each side beneath the jacket.

•Construct the enclosure as shown and place the insulated jacket into the enclosure. Place the cooking center into the jacket. No installation hardware is required.

		If Installing
		an Electrical
		Outlet for
		the Rotisserie
		Motor, Mount
		on Right Side
		(6.5 AMP Min.)
3" Min. for Lid	34-1/2"	22-3/4"
Clearance
		35-1/2"
	18-1/2"
9-1/8"		4x4 Opening
	18-1/4"	for Gas Supply
		Line
	24-1/8"	Opening
		for Access
		Doors

Installation in a non-combustible enclosure

•In a non-combustible (masonry) enclosure, the grill drops into the opening. A deck or ledge on each side is required for support from the bottom.

Clearances – All Models

•Allow 3” at the rear for lid clearance.

•Allow at least 12” clearance at the back of the grill when exhaust is directed to a window or a surface that is difficult to clean.

•Allow at least 6” clearance on each side to any non-combustible material located above the cooking surface for counterspace. Rotisserie models also require 6” clearance for placing and handling the motor and skewer.

•Allow at least 12” clearance on each side to combustible vertical materials.

Listed by

Underwriters

RLaboratories

	For answers to your Monogram,®
	GE Profile Performance Series,
	™
	GE Profile™ or GE appliance questions, call
Specification Revised 7/02	GE Answer Center® service, 800.626.2000.