Main Burner Conversion
Phillips Head Screwdriver (+)
6mm Nut Driver
1.Remove the rotisserie kit, warming rack, cooking grids, and flame tamers from the firebox.
Remove the main tube burners by removing the screw securing the burners near the back wall of the firebox and the screws near the front of the firebox that secure the igniter brackets to the burners. Gently lift the tube burners up and out
2.Locate and remove the LP orifice at the end of each valve with a 6mm nut driver. The main burner NG orifices are located behind the LP orifices, so no additional orifices need to be installed.
Z_CAUTION: The NG orifice is easily loosened or even removed together with the LP orifice when the LP orifice is being unscrewed. Make sure the NG orifices are securely installed on the main burner valves after the LP orifices are removed
z_CAUTION
When converting the grill, screw the orifice in and out of the stem gently. 3. Reinsert tube burners.
Z_CAUTION: Make sure the valve with orifice is inserted into the burner venturi. Restore the igniter brackets; adjust the distance between the burner and the corresponding igniter for proper ignition.
16