Operating Instructions, Power ON/OFF | Sanyo DTA-2680 instruction

OPERATING INSTRUCTIONS

When the AC power is connected, “-- -- : -- --“ shows on the LCD display. 1. Press the POWER/STANDBY button to turn the unit 'ON'.

/ON

Note: The LCD display lights up and “HELLO” greeting shows on display, the STANDBY LED light goes off. Volume at 13 (max 30).

2.	You can now select your desired music source by
	pressing one of the function buttons: TUNER/BAND or		Example : FM mode
3.	CD PLAY/PAUSE	or AUX or iPod on main console.
	To switch to POWER OFF, press the POWER/STANDBY
	button to turn the unit 'OFF'. “GOOD BYE” appears on

display. The STANDBY LED lights.	/ON

4. Display back light ON/OFF won’t be affected by power ON/OFF.

NOTE: Please turn off the unit to standby mode before disconnecting main power supply from the unit.

When the unit is first connected to an AC power outlet, the display shows "-- -- : -- --". To set the clock to the current time proceed as follows:

1. In power off mode, press and hold the PROG button for 2 seconds, the “12” hour digits begin to flash.

2.Press the / to select your desire either 12 or 24 hour clock time format.

3.Press the PROG button to hour mode until the hour flashes.

4.Press the / to adjust the hour time while it is flashing. Be sure to set the hour correctly for AM or PM.

5.Press PROG button once to minute mode and the minutes will flash.

6. Press the / to adjust the minute time while it is flashing.

7. Press the PROG button once more, the display stops flashing and the clock begins to run.