Assembly Instructions for Front Wheels

5.To assemble the Front Axle: Flip Cart around so handle is in back. Using the Short Axle (#3) and using the “Assembly Order”, put Cotter Pin in hole, Washer, Small Spring, Washer, Small Wheel (#5) and last Washer. Do the same on the opposite end of the Small Axle (#3). See Figure G. With both wheels in place, put axle into front frame holes of Cart. See Figure H.

#3 #5

Figure G

Figure H

6.With pliers, bend the ends of the Cotter Pins. Recheck to see all the Cotter Pins are crimped to prevent slipping out. Check Cotter Pins each time you use your cart to prevent losing a wheel. This Cart is for operating on a smooth, flat terrain.

7.The Four Wheel Cart can be folded-up for storage and held in place by a Latch on back of the Cart. See Figure I.

Latch

Figure I

SKU 40129

PAGE 4