
Introduction
Natural gas fireplaces, stoves, fireplace inserts and gas log sets burn more cleanly than wood fireplaces. This means no ash build- up, no creosote in chimneys and no sparks or flying embers that could burn holes in carpet or furniture. Natural gas hearth products are so clean, in fact, that they can be used anytime in areas of the country that have "no burn" regulations for wood fireplaces and stoves to reduce air pollution.
Natural gas fireplaces are the exception to the rule that gas equipment should always burn with a clean blue flame.
Gas hearth equipment can warm the home in two ways: radiant heat and convection heat. Convection takes advantage of warm
air’s tendency to rise
Radiant heating doesn’t warm air. Like the sun’s rays, it warms objects in its direct path. The heated objects
Many natural gas hearth products are classified as "decorative" gas appliances. That means that they are basi- cally used for appearance, although they can provide radiant heat to the room they are in. Other gas fireplaces and stoves are classified as wall heaters or space heaters. They have added technology, such as a heat exchanger and blower fan, to heat and move air through the room or home. If you want your natural gas fire- place to be a significant source of heating in your home, be sure you choose one that is designed to do that job.
Natural gas fireplaces are the exception to the rule that gas equipment should always burn with a clean blue flame. Special technology developed for fireplaces lets the gas burn with a yellow flame that looks more like a wood fire, and is almost as clean and efficient as the traditional blue flame.
Venting
As with all natural gas equipment, the gas burner in hearth products produces some combustion byproducts, primarily water vapor and carbon dioxide, the same elements we exhale when we breathe. So with some gas fireplace equipment, venting is required. Other, very
Note: Some state and local building codes do not allow unvented gas equipment to be used. Check with your hearth products dealer or your local building code officials before purchasing unvented gas equipment.
With products that require venting, there are many possibilities. If you are installing gas equipment in an exist- ing fireplace, you can use the chimney that’s already there to vent combustion byproducts. If you choose a new
- 1 -