Philips Compact HID Lamp and Gear manual HID-PrimaVision potted for MH/CDM lamps, HID-PV 70 /S

HID-PrimaVision (potted) for MH/CDM lamps

	Product Description
	●	Solid, one-piece electronic gear for 150W MH and CDM lamps and
		70W CDM lamps
	Product Features
	●	For use with Ceramic Discharge Lamps (CDM) and/or Metal Halide
		lamps (MH)
	●	Available as Standard (/S) for use in a luminaire, or with separate
		strain relief for independent use on a (false) ceiling
	●	For 70W CDM: Digital DALI interface for communication with the
		gear
	●	Minimal lamp power spread
	●	Microprocessor controlled
	●	Lamp end-of-life detection
	●	High Tambient and Tcase temperatures allowed
	●	Long lifetime of 40,000 h
	●	Eliminates all visible lamp flicker
	●	Reduces colour differences between lamps and initial lumen spread
	●	Silent operation without hum
	●	Performance is independent of mains voltage
	●	Lamp life increased by up to 30% (CDM) or 50% (MH)
HID-PV 70 /S	●	Simple installation and cabling
	●	Push-in connectors
	●	Separate strain-relief
	●	For 70W: DALI interface enables communication with gear for
		switching on/off and read-out of status
	Application
	●	70W: accent and decorative, shops and retail, indoor public spaces,
		lobbies and offices
	●	150W: as 70W for high ceilings
	●	Climatic suitability: for indoor and outdoor applications due to
		plastic housing and potting
	Quality
	Philips Quality assures optimum quality regarding:
	●	System supplier:As manufacturers of lamps and electronic control
		gear, Philips ensures that, from the earliest development stage,
		optimum lamp/gear performance is maintained
	●	European standards: Philips HID electronic gears comply with all
		relevant international rules and regulations

Compliances and approvals

RoHS compliant

ENEC approved

Recommended lamp page 2.98

www.philips.com/OEM

2.86OEM Catalogue 2009/2010