Vermont Castings Gas Patio Fire
3. Place volcanic rock evenly around and on burner |
pan if you have not already done so. (Fig. 10) |
Log C4
4. Place log C1 on burner, using locator pins and |
holes in bottom of log. (Fig. 11) |
Log C1 
Log C1
Log C2
LG162a
Fig. 11 Place log C1 on locator pins onburner.
5.Move around so that flex line is now on your right. Place log C2 with “Y” part of log toward the outside of the burner ring. (Fig. 12)
Log C2
Log C1
LG163a
Log C3 | LG164a |
|
Fig. 13 Logs C3 & C4 placement.
Log C5
Log C4
Log C1
Log C2
LG165a
Fig. 14 Log C5 placement.
Log C5 | Log C6 |
|
Log C4
Fig. 12 Log C2 placement.
Log
Log C2
6.Place logs C3 and C4 with flex line on your left. C3 fits just under angle of log C2. (Fig. 13)
7.Log C4 rests with ends of “Y” section on burner ring. Top of log rests on log C2.
8.Flex line on right. Place log C5 with the notch at the top resting next to log C3. (fig. 14)
9.Flex line on left. Place log C6 so the top of the log is over log C3 and bottom of log is over corner of the burner pan. (Fig. 15)
CAUTION
The logs are fragile. Use caution when placing the cover on, or removing the cover from, the unit to avoid damaging the logs.
C1 
LG166a | Log C3 |
|
Fig. 15 Log C6 placement.
8