Chauvet 700 user manual Mounting, Orientation

Page 7

Mounting

Orientation

The Hurricane™ 700 may be mounted in any position, provided there is adequate room for ventilation around it.

Rigging

Be sure that the structure or surface on which you are mounting this product can support its weight and operating temperature. Please see the “Technical Specifications” section of this manual for weight information. Refer to the following notes on rigging.

Make sure to mount the product securely to a rigging point, whether an elevated platform or a truss.

When rigging this product onto a truss, you should use a mounting clamp of appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for this purpose.

When mounting this product overhead, always use a safety cable.

Before deciding on a location for this product, always make sure that it will be easy to access the unit for maintenance and programming purposes.

The bracket knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs using your bare hands. Using tools could damage the knobs.

Mounting Diagram

Hanging bracket

Bracket knob

Rubber feet

Hurricane™ 700 User Manual (Rev. 08)

Page 7 of 12

Image 7
Contents Page Table of Contents Before YOU Begin Product at a Glance Safety NotesProduct Overview IntroductionReplacing the Fuse SetupAC Power Unplug the IEC power cable before replacing the fuseOrientation MountingOperation Using the Wired RemoteTechnical Information General MaintenanceStorage Symptom Possible Cause Possible Action General TroubleshootingContact Information Returns ProcedureWorld Headquarters United Kingdom & Ireland Power Technical Specifications
Related manuals
Manual 11 pages 6.43 Kb