Centro 4000B warranty G H T I N G E G R I L L

Page 7

L I G H T I N G

T H E G R I L L

•Make sure you have followed all the checks, procedures and instructions indicated in the prior sections before attempting to light the grill.

•Always raise the barbecue lid before lighting the burner.

•Do not bend directly over the barbecue while lighting in case of back flash.

•Making sure all the control knobs are off, slowly and carefully open the propane gas cylinder valve. Wait about five seconds before opening the burner valve and lighting the barbecue. This procedure allows the pressure to stabilize, and prevents the flow control feature from activating. Note: If the flow control feature does activate, turn off the burner control valve and the cylinder valve, wait about 30 seconds then turn on the cylinder valve slowly. Wait 5 seconds and turn on the burner valve and light the barbecue.

Lighting the Main Burner

•Important: Light centre burner / burners first!

•Once burner is lit the burner next to it will light by turning the control knob to “HIGH”.

•Never light the outside burners unless the centre burner / burners are lit.

Using the Igniter to Light the Burner

•Raise the lid of the barbecue.

•Turn on tank.

•Push in and turn the control knob to “HIGH” position.

•Push the igniter button until a clicking noise is heard (a spark is being applied).

•If the burner does not light after three attempts, turn the control knob to the “OFF” position and wait for the gas to clear (about 5 minutes). Repeat the previous lighting procedure.

•If the burner still does not light, refer to the troubleshooting guide for help, or light with a long match with extension match holder provided.

Manual Lighting Procedure

The barbecue has a small hole on the lower left side of the housing. This hole is towards the front of the barbecue and is used to manually light the barbecue.

•Raise the lid of the barbecue.

•Place the lighted match with a match holder, or extension rod provided, through the hole to within 1.6cm (1/2”) of the burner.

•Turn on tank.

•Push in and turn the burner knob to the “HIGH” position. At this point, the burner should light, if it doesn’t after 5 seconds, turn the control knob back to the “OFF” position and wait for the gas to clear.

•Wait 5 minutes, and then repeat the manual light procedure. If after three tries the burner still does not light, review the troubleshooting guide for help.

To Reset the Gas Regulator Safety Device

•Close the LP (propane) tank valve.

•Turn all burner control knobs to the “OFF” position.

•Disconnect the regulator from the LP tank.

•Open grill lid. Wait five minutes for gas to clear.

•Re-connect the regulator to the LP tank. Test for leaks.

•With lid open, turn the centre burner control knob to the “HIGH” position and then ignite the grill by pushing the igniter button.

•Close the grill lid.

•Wait for 10 to 15 minutes. The barbecue should become hot.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 0 2 0 4 8 5 1 2 1 4 4 N a T U R a L G a S F E U S E , C a R E a N D a S S E M B L Y M a N U a LE a R L I M I T E D W a R R a N T Y 0 2 0 2 8 5 1 2 5 4 8 P R O P a N EB L E O F C O N T E N T S D I T I O N a L R N I N G S InstallationTo Avoid Unnecessary Risks A N S P O R T a T I O N a N D S T O R a G E C Y L I N D E RL L I N G E C Y L I N D E R A K T E S T I N G S E a N D R E G U L a T O RPerform a Leak Test Following Must be Checked I O R T O U S I N GG H T I N G E G R I L L Shutting Down the Barbecue After Use Lighting the Second BurnerLighting the Side Burner Lighting the Side Burner with a MatchP S O N U S I N G U R B a R B E C U E How to Prevent Food From Sticking on the Cooking GratesO R a G E E a N I N G D M a I N T E N a N C EProblem Possible Causes Corrective Action Troubleshooting G U I D E1 2 5 4 8 P R O P a N E R T S L I S T F O R1 2 5 4 8 P R O P a N E 1 2 1 4 4 N a T U R a L G a S 1 2 1 4 4 N a T U R a L G a S S E M B L Y I N S T R U C T I O N S Tools Needed for AssemblyHardware Pack List Page Page Page Page For Propane Model only Natural Gas Supply Connection Connecting to Gas LineDisconnecting From Gas Line F O R M a T I O N O N T U R a L G a S M O D E LS T R I B U T O R

4000B specifications

Centro 4000B is an advanced multifunctional device that has been designed to meet the demands of modern workplaces. As a top-of-the-line offering in the realm of office technology, the Centro 4000B seamlessly integrates into various business environments while delivering remarkable performance and efficiency.

One of the standout features of the Centro 4000B is its high-speed printing capability. With a print speed of up to 40 pages per minute, it significantly enhances productivity, allowing businesses to complete large volume print jobs in a fraction of the time. The device employs cutting-edge laser technology, ensuring crisp and clear text as well as vibrant color prints. Furthermore, it supports various paper sizes and types, making it versatile for different printing needs.

Another key characteristic of the Centro 4000B is its robust scanning functionality. It features an advanced document scanner that can scan up to 30 pages per minute, offering both color and black-and-white scanning options. The automatic document feeder allows for batch scanning, streamlining workflows and reducing the time spent on manual tasks. The scanning technology also provides options for double-sided scanning, ensuring efficiency in document management.

In addition to printing and scanning, the Centro 4000B serves as a reliable copier, offering features such as reducing or enlarging documents, collating multiple copies, and basic editing capabilities. This multifunctionality helps organizations consolidate their office equipment, saving space and resources.

The Centro 4000B employs an intuitive touchscreen interface that simplifies operation for users of all skill levels. This user-friendly design facilitates quick access to various settings and functions, from selecting print options to managing document workflows. Moreover, the device is compatible with mobile printing technologies, allowing users to print directly from their smartphones or tablets, enhancing convenience in today’s fast-paced work environment.

Security features are also a top priority with the Centro 4000B. It comes equipped with advanced encryption protocols and user authentication measures to protect sensitive information. This is particularly important for businesses that deal with confidential documents and require stringent information security practices.

Moreover, the energy-efficient design of the Centro 4000B helps reduce operational costs while minimizing the environmental impact. With its lower power consumption and environmentally friendly printing processes, it is an ideal choice for environmentally conscious businesses.

In conclusion, the Centro 4000B combines speed, functionality, and security, making it a comprehensive solution for offices and businesses that require a reliable and efficient multifunctional device. With its advanced features and technologies, it stands out as a leader in the office equipment market.
Top Page Image Contents